Airsoft Canada

Go Back   Airsoft Canada > Information Center > Reviews
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

G&P G36"V" Folding Buttstock with pics

:

Reviews

Reply
 
Thread Tools
Old January 13th, 2006, 00:45   #1
Darklen
Administrator
 
Join Date: Jan 2004
Location: Red Deer, AB
G&P G36"V" Folding Buttstock with pics





One of the biggest problems with the G36 series is lack of a storage spot for a large type battery. This stock, from the G36KV, allows for storage of a large type battery in the stock, while still allowing folding and adding a bit of retraction should the user need some adjustment. Cost me $65.00 usd from UNCompany, arrived in 5 days with other parts.

OOTB impressions:

The stock is a reasonable, but not exact, copy of the HK "V" stock. It's really only missing the "HK" trades on the sides and a few details, which in ABS plastic, may cause some weak spots. Same fit & finish as their G36KE folding stock & carry handle with 3.5X scope, which means it doesn't quite match the TM plastic, but we're used to that. Comes with the stock (two peices), wiring to run the battery from the stock to the gearbox (battery end has Deans connectors, other end is bare), short wiring chunk with more deans (I use for charging battery), a loose regular Tamiya connector (small female) and a couple of pieces of shrink tubing. No instructions or other hardware are included.

Intalled in less than 10 minutes, including wiring for large battery in the stock (not included). Just fold your existing stock, remove the tiny allen screw that locks hinge pin in place at the bottom (1.5mm) slide the hinge pin up & out, remove existing stock and reverse the procedure with the G&P stock. I used a very small amount of Locktite 222 on the allen screw before torquing it in to make sure it won't come out unless I want it to.

While some retailers say you can't fold the stock with a large battery installed, you really can. The issue is the wiring which now runs through the stock into the rear of the receiver. Folding isn't the problem, but you might pinch the wires re-engaging the stock if you're not careful.

I ran my battery wiring through the stock, into the back of the receiver, over the gearbox (you have to pull it out to do this), in front of the hop up and doubled back a bit. Then I connected the tamyia plug to the bare wire ends and connected the harness directly to the gearbox. I suppose you could hook it to the existing wiring harness in the handguard if you wanted the option to switch to mini batteries without ripping half the gun apart. In my haste to get this puppy together, I didn't use the shrink tubing, but I should have used some where the stock folds to protect the wiring, though I don't fold the stock in practice.

After installation and some fire testing to ensure everything was hooked up properly, I shouldered my "new" rifle to check the pull. On full extension it's way too long and I stand 6'5". I adjusted it to the next shortest postion and it's 3/8" longer than G&P's G36K/E stock, just right for me. Unfortunately though, the stock cannot be shortened any further if you have a large battery inside, no room.

I'll be gaming with this setup this Saturday, so I can report how it performs in the field (with the Star G36 carry handle w/RDS).

~Edit~ Stock performed as well as expected. A bit more wobble than G&P and TM stock due to the two peice design, but nothing that isn't tolerable. The extra pull on the stock made it more comfortable for me as well. A recommended upgrade if you want to use a large battery and/or need a longer stock.
__________________
ASC Age Verifier for Red Deer & Area Alberta
Darklen is offline   Reply With Quote
Old March 12th, 2006, 15:19   #2
Droc
Guest
be nice if they did something like this for the sig 552
I love the look of the sig, but not being able to have a large battery is a real kicker

nice review BTW
  Reply With Quote
Old March 12th, 2006, 19:45   #3
Darklen
Administrator
 
Join Date: Jan 2004
Location: Red Deer, AB
Thanks. I like it so much a bought another one for my G36K.
__________________
ASC Age Verifier for Red Deer & Area Alberta
Darklen is offline   Reply With Quote
Old May 1st, 2006, 20:00   #4
entity_paintball
 
Join Date: Feb 2005
nice review. ill add this to my consideration of what gun i buy!
__________________
team entity
sponsors: paintball action games.

taste of chaos edmonton was awsome!
entity_paintball is offline   Reply With Quote
Old May 1st, 2006, 20:41   #5
gandar
 
gandar's Avatar
 
Join Date: Oct 2004
Location: Sault Ste. Syberia, ON
Send a message via MSN to gandar
Guh, I still can't get over that stock... REEAAALLLLYYYY don't like how it looks... I'd carry an extra battery just so I didn't have to use that stock...
__________________
Ubique Quo Fas et Gloria Ducunt


Alternatively, I could just light you on fire. - Me
gandar is offline   Reply With Quote
Old May 2nd, 2006, 01:19   #6
Darklen
Administrator
 
Join Date: Jan 2004
Location: Red Deer, AB
Then carry an extra mini, I did for two years. Main reason I switched was it was longer the even G&P's stock. The large battery was just icing for me.
__________________
ASC Age Verifier for Red Deer & Area Alberta
Darklen is offline   Reply With Quote
Old May 2nd, 2006, 01:41   #7
The Saint
 
The Saint's Avatar
 
Join Date: Jan 2005
Location: Quebec
Quote:
Originally Posted by Darklen
Main reason I switched was it was longer the even G&P's stock. The large battery was just icing for me.
Funny enough, I switched to the KV because it was shorter than even the C stock. I wasn't planning to use the large battery compartment, but then I got fed up with the handguard and mini combo and made the switch.
__________________
"The Bird of Hermes is My Name, Eating My Wings to Make Me Tame."
The Saint is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Information Center > Reviews

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada

All times are GMT -4. The time now is 03:49.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.