|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
January 25th, 2007, 23:02 | #1 |
Double Feed in G36c
Please put this thread out of its misery.
Last edited by milehigh; January 31st, 2007 at 20:43.. |
|
January 29th, 2007, 20:42 | #2 |
Anyone?
|
|
January 29th, 2007, 20:51 | #3 |
Whats the FPS on a 170% spring?
Mabey its a mag issue.. You try silicon oil drop in the mag before loading?
__________________
No Comment. |
|
January 29th, 2007, 20:55 | #4 |
its not a mag issue...its shooting just below 400fps
|
|
January 29th, 2007, 22:40 | #5 |
Hmm.. Who installed the upgrade? What all was upgraded in the gun?
__________________
No Comment. |
|
January 29th, 2007, 23:10 | #6 |
the air seal nozzel in the right spot?
__________________
The fresh scent of burnt hair you just can't buy that! |
|
January 31st, 2007, 03:57 | #7 | ||
Quote:
And I will restate that I have already read about possible solutions. I want to hear PROVEN FIXES. Quote:
Last edited by milehigh; January 31st, 2007 at 03:59.. |
|||
January 31st, 2007, 09:43 | #8 | |
OK first off have you ever upgraded a gun before?
I notice that the air seal nozzle doesnt rest far forward on every second shot. Quote:
Here is a great site www.mechbox.com Here is a great video Ver.3 Mechbox Uprade There are alot of tools on this site and unfortunetly the people on this forum aren the tool.. We are gladly helping you but we need more details.. Plastic bushings are made for stock guns not upgraded like you have now. I would suggest you reopen and install new ones and while your in there check the Air Nozzle.
__________________
No Comment. |
||
January 31st, 2007, 10:26 | #9 |
Rest in Peace
|
First things I would check is timing and nozzle.
If you don't know how to time it, do a little research or get a local gun doctor to set it for you.
__________________
"Good judgment comes from experience. Experience comes from bad judgment!" |
January 31st, 2007, 20:08 | #10 |
Hazard, the gun has the metal bushings. I didnt mention that because I figured its just a given to have them with an upgraded spring. And I have already seen the video.
I dont think I am coming across quite clearly here. I want to hear about proven fixes. I have read dozens of threads about people having the same problem, so i have already read your suggestions dozens of times. Unfortunatley, I didnt see much follow up from people with the same problem, and that is why i made this thread. Maybe I should have the title changed to "Calling all people who have fixed the double feeding problem on their G36C's" For the record, a local gun doctor did the spring upgrade, and as for timing...Half of everyone says to check the timing, and the other half says that timing is reset on every shot. |
|
January 31st, 2007, 20:14 | #11 |
Check hop up. Try JAPAN made bb's.
__________________
Gary Paul Johnston: on selecting a new MEU (SOC) 1911 pistol-Whatever happens,there's no doubt that a "few good men" will once again carry the finest combat pistol in the world and we can only pray that a lot of bad men will regret it. Coyote tan is the new black... |
|
January 31st, 2007, 20:18 | #12 |
maybe you can explain why Japanese bbs won't double feed.............damn:banghead:
|
|
February 1st, 2007, 00:28 | #13 | |
Quote:
There is a bb comparison floating around these parts somewhere...
__________________
Gary Paul Johnston: on selecting a new MEU (SOC) 1911 pistol-Whatever happens,there's no doubt that a "few good men" will once again carry the finest combat pistol in the world and we can only pray that a lot of bad men will regret it. Coyote tan is the new black... |
||
February 1st, 2007, 04:20 | #14 |
Check your hop bucking for wear.
|
|
|
Bookmarks |
Thread Tools | |
|
|