|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
October 19th, 2008, 16:06 | #1 |
G36 Hop up info.
I have recently lost a piece of my hop-up, and will have to replace it. Any recommendations?
I've found a few: http://www.airsoftpost.com/product_i...ducts_id=25732 (Out of Stock) http://www.airsoftpost.com/product_i...ducts_id=27860 Any ideas? Thanks in advance. PS-I know I already had another thread, but that issue is know over. _________________________________ Last edited by warbird; October 19th, 2008 at 16:14.. |
|
October 19th, 2008, 16:08 | #2 | |
URL's don't work
__________________
Quote:
|
||
October 19th, 2008, 16:12 | #3 |
humm..sec.
Edit: Fixed. Last edited by warbird; October 19th, 2008 at 16:14.. |
|
October 20th, 2008, 19:51 | #4 |
What exact piece did you lose from the hop up? Or did you lose the entire chamber?
|
|
October 20th, 2008, 20:49 | #5 |
Pretty sure this will work.. They also have the SRC one but I dont recommend that.
http://www.airsoftgi.com/product_inf...oducts_id=2008
__________________
No Comment. |
|
October 21st, 2008, 07:47 | #6 |
Even if mine is TM compatible?
|
|
October 21st, 2008, 14:55 | #7 |
http://www.wgcshop.com/pcart/shopper...C_srch_pro-win
get that. its made for a TM, but with some modification via a dremel these are the best things you can get for a CAG36. PS: it does not come with the ribber or any other parts just the chamber Last edited by Spa; October 21st, 2008 at 15:00.. |
|
October 21st, 2008, 14:56 | #8 |
http://www.wgcshop.com/pcart/shopper...C_srch_pro-win
get that. its made for a TM, but with some modification via a dremel these are the best things you can get for a CAG36 PS: it does not come with the ribber or any other parts just the chamber Last edited by Spa; October 21st, 2008 at 15:00.. |
|
October 21st, 2008, 21:28 | #9 |
SPA the CA one will fit a TM as well.. That Pro Win one does require some modification and if you screw up doing it there is no return.
__________________
No Comment. |
|
October 22nd, 2008, 01:11 | #10 |
On my G36, the gearbox has a screw at the top on the side that prevents it from fitting properly.
I may have an old gearbox, but that issue came up. |
|
October 22nd, 2008, 06:30 | #11 |
I don't have a CA, lol. It's an Echo1, that's why I was asking for TM compatible. It sucks, cause I only lost the little C-ring, if you want to call it that.
|
|
October 23rd, 2008, 14:00 | #12 |
oh that thing, lol. It's pretty hard to find that individual part unless you know a gun tech in town or someone with spare parts lying around.
http://www.wgcshop.com/pcart/shopper...g36%20hop%20up 15 bucks for a new one. cant do much about it. I post about redwolf but they are out of g36 hopups. And i know for TM and CA models, the hop ups are both the exact same. I have not seen different variations in hop ups with other brands so they should be cross compatible Last edited by Spa; October 23rd, 2008 at 14:03.. |
|
October 23rd, 2008, 14:06 | #13 |
Tys
|
I've got one. Brand new in baggie. Haven't touched it in a year+ since I let my G36c go.
Is the C clip that different from others? I'll take a peek tonight if I get the chance. I think I have an MP5, AK, G3 and about 4-5 M4 hopups to compare against. I think I also have an odd c-clip or two...but I have no idea what hopup it came off of. Tys |
October 23rd, 2008, 16:00 | #14 |
the c clip should have 3 prongs on it to hold the circular part that holds that hop up nub in.
|
|
October 23rd, 2008, 20:23 | #15 |
The Echo1 hop-up is just like the one Spa linked us.
|
|
|
Bookmarks |
Thread Tools | |
|
|