MP5 butt stock problem

Inquisitor · May 16th, 2009, 17:30

Hi everyone!

I recently bought a Jing Gong model M5-J. It's been working great but there is a problem with the collapsible stock. It came in the box half-way out, which is probably normal, but since I got it all the way in, I can't get it out.

The manual says that it's supposed to ''jump out'' when the lever is pulled but it's not working. Is there some kind of switch that I should pull to?

I tried injecting some lube in the slide, doesn't work. I pulled really hard, doesn't work.

Thanks for the help!

Styrak · May 16th, 2009, 17:36

You should just be able to swing the lever to the side and pull the stock out at the same time.

lemegacool · May 16th, 2009, 17:39

maybe the slides stop and spring were putted wrong inside causing it to perma-lock the slides, if its not working when pressing the stock lever on the side the dissasemble the stock and check then little catch and spring, go to mechbox.com for a mp5j dissasembly video

Crunchmeister · May 16th, 2009, 18:05

JG sliding stocks are stiff when they're new. Takes a while to get it worked in and nice and smooth. And they're not spring loaded. You have to pull it. It doesn't spring out.

Inquisitor · May 16th, 2009, 20:31

Thank you very much!

I dissambled it and was able to slide the stock. It is still stiff but it's a great improvement!

Crunchmeister · May 16th, 2009, 20:58

It'll get smoother with time. Try a little silicone oil in the channels too. That'll help it move easier.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

May 16th, 2009, 17:30	#1
Inquisitor Trader rating Join Date: May 2009 Location: Montreal, Qc	MP5 butt stock problem Hi everyone! I recently bought a Jing Gong model M5-J. It's been working great but there is a problem with the collapsible stock. It came in the box half-way out, which is probably normal, but since I got it all the way in, I can't get it out. The manual says that it's supposed to ''jump out'' when the lever is pulled but it's not working. Is there some kind of switch that I should pull to? I tried injecting some lube in the slide, doesn't work. I pulled really hard, doesn't work. Thanks for the help!

May 16th, 2009, 17:36	#2
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	You should just be able to swing the lever to the side and pull the stock out at the same time. __________________ Airsoft Sales and Repair/Upgrade Services

May 16th, 2009, 17:39	#3
lemegacool Trader rating Join Date: Aug 2008 Location: notre dame des prairies /quebec	maybe the slides stop and spring were putted wrong inside causing it to perma-lock the slides, if its not working when pressing the stock lever on the side the dissasemble the stock and check then little catch and spring, go to mechbox.com for a mp5j dissasembly video __________________ member of fire team NOM. my other regular forum: www.toyotanation.com / gen3,gen4 camry Last edited by lemegacool; May 16th, 2009 at 18:01..

May 16th, 2009, 18:05	#4
Crunchmeister Trader rating Join Date: Nov 2007 Location: In your bedroom going though your underwear drawer	JG sliding stocks are stiff when they're new. Takes a while to get it worked in and nice and smooth. And they're not spring loaded. You have to pull it. It doesn't spring out. __________________

May 16th, 2009, 20:31	#5
Inquisitor Trader rating Join Date: May 2009 Location: Montreal, Qc	Thank you very much! I dissambled it and was able to slide the stock. It is still stiff but it's a great improvement!

May 16th, 2009, 20:58	#6
Crunchmeister Trader rating Join Date: Nov 2007 Location: In your bedroom going though your underwear drawer	It'll get smoother with time. Try a little silicone oil in the channels too. That'll help it move easier. __________________

MP5 butt stock problem

Newbie Tank