|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
August 26th, 2009, 21:39 | #1 |
RC car batteries= Airsoft batteries?
I was looking at my local hobby store and came across some 9.6v 1600mah ni-Cd batteries. I was wondering if these will work in an airsoft gun. They seem rather small compared to the handful of airsoft batteries I have seen. Is it just a bigger punch is a smaller package?
Last edited by Codeh002; August 26th, 2009 at 21:42.. |
|
August 26th, 2009, 21:41 | #2 |
Yes, they are the same.
|
|
August 26th, 2009, 21:42 | #3 |
planes and helicopter lipos works too... (20c discharge recommended)
__________________
member of fire team NOM. my other regular forum: www.toyotanation.com / gen3,gen4 camry |
|
August 26th, 2009, 21:44 | #4 |
How long would a 1600mah expect to work? Like how many shots would I get roughly ?
|
|
August 26th, 2009, 21:46 | #5 |
From what I've read, 1000mAh per 500-1000 (up to) shots (depending on the quality, temperature, and other variables).
|
|
August 26th, 2009, 21:53 | #6 |
Volts and mah are not the only thing to look for. Discharge rate (C) is important too. Just because it has 9.6v and 1600mah, if it has 5C discharge rate... it won't pull the gun over.
Just a heads up. A 7.4v lipo at 1600mah and 20C can EASILY pull over a 400fps gun at 19 rounds per second for a full game day. |
|
August 26th, 2009, 21:54 | #7 |
WIll the Discharge rate be listed on the box?
|
|
August 26th, 2009, 21:55 | #8 |
http://www.thesource.ca/estore/Produ...roduct=2300322
This is the battery Im looking at well one of them. |
|
August 26th, 2009, 23:15 | #9 | |
7.2v won't do anything for an airsoft gun. Also, most airsoft guns with small tamya connectors have the polarity reversed. Check out www.cheapbatterypacks.com for batteries, and get the NPT smart charger from www.airsoftparts.ca or BBBastard.
__________________
Quote:
|
||
August 26th, 2009, 23:17 | #10 |
you should invest in a proper airsoft battery or a lipo setup... etheir way you wont regret it...
__________________
member of fire team NOM. my other regular forum: www.toyotanation.com / gen3,gen4 camry |
|
August 26th, 2009, 23:27 | #11 |
1600 mAH 8.4 lasts my one gun all day.
It's all about shooting when you need to, and shooting at the right thing. Plus taking care of your battery is essential, a good charger will do you great.
__________________
Johann Hansen. 1./SS-Pz-Gren. Rgt. 20. 9th SS Hohenstaufen. Ontario's Largest WW2 re-enactment. OP Woodsman. Join us! |
|
August 26th, 2009, 23:30 | #12 |
Actually, 7.2v has been demonstrated to work quite well in moderate fps guns, providing that the 7.2v has a favorable discharge rating (ie. most sub-c cells with high mah, or LiPo).
__________________
"The Bird of Hermes is My Name, Eating My Wings to Make Me Tame." |
|
August 27th, 2009, 19:47 | #13 | ||
Quote:
I'll rephrase.. most 7.2v won't work to well. Depends on the battery and your setup. On the up side, batteries designed for R/C are usually made out of cells that can handle a high discharge rate... at least the good ones are anyway.
__________________
Quote:
|
|||
|
Bookmarks |
Thread Tools | |
|
|