|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
October 21st, 2009, 10:46 | #1 |
FPS
My V4 S-system was shooting 400 fps out of the box with .20g. Obviously I would not be allowed to bring this to an indoor game. How much would velocity change going to a heavier bb? Or, do you not want to use heavier bb's indoors.
|
|
October 21st, 2009, 10:48 | #2 |
formerly Lythinca
Join Date: Oct 2008
Location: You know that Home Depot on King st? Yeah, no where near there.
|
You'd want to change your spring and such. As, FPS tests at games are done with .20 bbs, even if your going to be using a heavier.
__________________
Currently modding AK. Loadout 1: Yugoslavian M76/Maadi RML Alternative (Kraken) CYMA Glock 18C Loadout 2: TM MP5 w/ flashlight CYMA Glock 18C Both Loadouts have Marpat Uniform, PASGT Helmet w/ Flecktarn, and Flecktarn chest rig. |
October 21st, 2009, 10:51 | #3 |
fps can be misleading. if you know some basic phsyics you should know about inertia. Even though the .25g is traveling slower it will still hit with the same if not more energy *AKA joules*. In all honesty this is what we should be using and not FPS for field limits. That way you can be "cronoed" in on any weight of BB.
Long answer short, you need a spring or a velocity reducer but I have heard those are crap. |
|
October 21st, 2009, 10:51 | #4 |
What's important is the muzzle energy, not velocity. When we refer to 400 or 350 fps as 'field legal', that's assuming the use of .2g BBs. While using a heavier BB will reduce the velocity, the heavier weight of the BB will translate to the same energy. So a gun shooting 400 fps with .2 produces 1.49 Joules of energy. The same gun shooting a .28g BB will be shooting at 338 fps, and STILL producing 1.49 Joules. of energy.
The only way to reduce your velocity is to swap your spring.
__________________
|
|
October 21st, 2009, 10:53 | #5 | |
8=======D
|
Quote:
The idea of a 350 FPS limit is to reduce the possibility of injury from close range hits. the injury potential of a 400fps .2 is the same as the potential of a 340 fps .25 There is no need to use havier BBs indoors you don't have the wind or vegetation penetration issues to contend with .. and the range is typically all well within the effective range of the weapons anyway.
__________________
Brian McIlmoyle TTAC3 Director CAPS Range Officer Toronto Downtown Age Verifier OPERATION WOODSMAN If the tongue could cut as the sword does, the dead would be infinite |
|
October 21st, 2009, 10:56 | #6 |
drop your gun down to 340 with a weaker spring with .2 bb's. indoors or outdoors with some heavier bbs you won't need more fps then that unless its extremly windy
__________________
OOOOHHHH YEAAAHHH Last edited by KoolAidMan; October 21st, 2009 at 11:06.. |
|
October 21st, 2009, 11:05 | #7 |
there yah go the same answer 3 different ways, pick one.
Edit* 4 different ways... |
|
October 21st, 2009, 11:22 | #8 |
Tys
|
Good for you on paying attention to this. When some of the original batch of hot clones came out, guys were playing indoors with them. A buddy of mine left a game with 3 BBs embedded in his back....nasty stuff.
Stick a M90 rated spring (90 meters/sec = ~300fps) in it. For a lot of CQB there's really no need for much more and it'll just plain hurt your friends. A lot of times you end up in a tight spot with shots really close up and it's nice to know in the back of your mind that you're not going to be dishing out batches of bloody welts. Modify make great springs...their S90 spring would be a good one. Depending on your setup, it'd give anywhere between 300-340fps w/0.20's. It's a wide range of FPS...and that's another good reason to aim lower than the maximum listed limit. Best of luck. Tys |
October 21st, 2009, 11:23 | #9 |
M90 or M100 will bring you down to what you need. IMO 350 is unnessecary since CQB distances are so short that a velocity change will only affect the time it takes the BB to exit the barrel and hit someone by milliseconds if not less than that.
330 is probably a safer bet (since a lot of fields use that as the limit) and as such the M90 is probably a better spring to go with. Remember FPS limits are just that a limit not a goal.
__________________
ಠ_ಠLess QQ more Pew Pew READY TO >> RACE |
|
October 21st, 2009, 11:40 | #10 |
somehow 0.3's travel around the same speed and they hit ALOT harder due to the weight. i think your best bet is just to change the spring. it's cost effective and will ensure that you have the peace of mind aaha
|
|
October 21st, 2009, 12:11 | #11 | |
Quote:
seriously this thread can't go any further. |
||
October 21st, 2009, 12:16 | #12 |
formerly Sepulcrum
|
Then why are you continusly adding usless posts, nobody cares about post counts here you know.
|
October 21st, 2009, 12:18 | #13 |
more posts I Have the more 1337 I am. Its simple math. Oh look another one!
|
|
October 21st, 2009, 12:36 | #14 | |
Official ASC Bladesmith
|
Quote:
|
|
October 21st, 2009, 17:29 | #15 |
asexual lumbricus terrestris
|
Prometheus MS90SP is nice.
A spring swap is one of the easiest things you can do to your gun. When you do it yourself, just use mechbox.com and youtube guides on a S-system (JG or TM, ect.) disassembly guides, and make sure to not touch anything else, or unevenly torque your mechbox shell. Should put you around 300-320fps? I think? |
|
Bookmarks |
Thread Tools | |
|
|