|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
January 25th, 2010, 22:43 | #1 |
aka Halo64
|
Charging handle spring
Hey, I'm looking for a very strong M4 Charging handle spring after stretching my old one, I bought one from AirsoftParts.ca but its not strong enough to even pull the Charging handle back into place. The stock G&P spring was perfect but I can't find them.
Thanks |
January 25th, 2010, 23:09 | #2 |
asexual lumbricus terrestris
|
if you are talking about a modify one, try buying another, mine is very stiff compared to some others.
The TM one in my s-system is also very strong. |
January 25th, 2010, 23:41 | #3 |
aka Halo64
|
This is the one I ordered http://www.airsoftparts.ca/store2/in...oducts_id=1033
|
January 25th, 2010, 23:47 | #4 |
formerly Sepulcrum
|
That ones is perfectly fine,I've used it to replace a few of the ones I've accidentally stretched during disassembly. You sure you didn't accidentally stretch this one too?
|
January 26th, 2010, 00:00 | #5 |
aka Halo64
|
No this one is not stretched, but with the stock spring it would slam in hard, now it will only pull out and just stay there.
|
January 26th, 2010, 00:10 | #6 |
asexual lumbricus terrestris
|
if it stays there then it's either really really stretched or you haven't connected it..
|
January 26th, 2010, 00:12 | #7 | |
i have that issue with my M4, after stretching 3 springs, i switched it over to an elastic band or 2. it may not be pretty or fancy, but it works, and when the band does fail... its a half a cent replacement fee!
__________________
Quote:
|
||
January 26th, 2010, 00:54 | #8 | |
aka Halo64
|
Quote:
Thanks for the Idea I'll try it out. |
|
January 26th, 2010, 00:56 | #9 |
January 26th, 2010, 13:12 | #10 |
Thank you. That is a pro tip.
|
|
|
Bookmarks |
Thread Tools | |
|
|