February 18th, 2010, 20:19 | #1 |
formerly Lythinca
Join Date: Oct 2008
Location: You know that Home Depot on King st? Yeah, no where near there.
|
650mm barrel for AK?
Hey guys. Refering back to one of my older posts about my 250mm silencer that I added to my AK47/Kraken. (I'm building an RML & M76 mix)
With the silencer added on, I would need an inner barrel of 705mm. (But they dont come in that size. Biggest is 650mm AFAIK.) Would this MadBull 6.03mm TB 650mm innerbarrel work with my AK? http://www.airsoftparts.ca/store2/in...roducts_id=461 Is theyre any cheaper alternatives? Also, if I am replacing the stock barrel with this, are there any other upgrades that I should do to my gun? Or would a longer barrel without any upgrades be fine? (If I recall correctly, putting a random upgrade part in a gun, can do more harm than good, if none of the other stuff is upgraded.) /spoonfeed (You know, I love you all. Except you. *Points at tall person in crowd.*) EDIT: Might aswell ask this too: Are there any AK47 Shorty Mags availiable?
__________________
Currently modding AK. Loadout 1: Yugoslavian M76/Maadi RML Alternative (Kraken) CYMA Glock 18C Loadout 2: TM MP5 w/ flashlight CYMA Glock 18C Both Loadouts have Marpat Uniform, PASGT Helmet w/ Flecktarn, and Flecktarn chest rig. Last edited by Love; February 18th, 2010 at 20:24.. |
February 18th, 2010, 20:28 | #2 |
not sure if anybody makes 700mm+ TB's. the madbull TB u posted on airsoftparts is a decent one(and pretty cheap one). with a longer barrel you should perhaps get a bore up kit. as for the shorty ak mags they're everywhere. most airsoft retailers online have them
|
|
February 18th, 2010, 20:31 | #3 |
formerly Lythinca
Join Date: Oct 2008
Location: You know that Home Depot on King st? Yeah, no where near there.
|
I havn't seen any shortmags online. Link please? (And yes, I'd rather order inside of canada, but I'll order internationally if I have to.)
Also, Pusangani cleared it up for me too. All barrels for AEG's are same, hopup rubbers too. I see bore-up cylinder sets/kits for around $75 on airsoftparts. Good price? (Bore-ups, are for pushing more air through the barrel right? I'd need it because the kraken gearbox isnt meant for a long barrel.)
__________________
Currently modding AK. Loadout 1: Yugoslavian M76/Maadi RML Alternative (Kraken) CYMA Glock 18C Loadout 2: TM MP5 w/ flashlight CYMA Glock 18C Both Loadouts have Marpat Uniform, PASGT Helmet w/ Flecktarn, and Flecktarn chest rig. Last edited by Love; February 18th, 2010 at 20:34.. |
February 18th, 2010, 20:47 | #4 |
Tokyo Marui makes a 250 round hi-cap AK shortmag as seen here http://www.combatdepot.com/product_i...0eeac93d65117c.
I haven't found any mid or low cap AK short mags however if you find some contact me, I'm interested in picking some up. The only other way I'm thinking of involves a lot of work and may not actually work which is to take a standard length AK mag and cutting it down while modding the internals to work with the cut down mag. This probably involves a dremel, messing with the feeding track and messing with the spring. Like I said a lot of work for not too much gain and possibly destroying a mag in the process.
__________________
ಠ_ಠLess QQ more Pew Pew READY TO >> RACE Last edited by L473ncy; February 18th, 2010 at 20:49.. |
|
February 18th, 2010, 20:50 | #5 | |
Jagdalex
|
Quote:
|
|
February 18th, 2010, 20:51 | #6 |
Official ASC "Dumb Ass"
|
or get RS 5rd shorty mags, and put a TM shotgun shell in it, will need to remove the spring and follower and dremel to make it fit in the magwell - I've seen ANcorp do it.
*edit* or find a retailer overseas that sells the K92B MPEG and ask them if the short mag that comes with it is a hicap or standard.
__________________
Last edited by pusangani; February 18th, 2010 at 20:53.. |
February 18th, 2010, 20:52 | #7 | ||
Quote:
a bore up cylinder set for $75 isn't that much. but then again u gotta ask yourself why ur going with a longer barrel....etc. Quote:
|
|||
February 18th, 2010, 20:54 | #8 |
aka coachster
|
|
February 18th, 2010, 20:56 | #9 | |
Jagdalex
|
Quote:
|
|
February 18th, 2010, 21:03 | #10 |
formerly Lythinca
Join Date: Oct 2008
Location: You know that Home Depot on King st? Yeah, no where near there.
|
Tempting but I dont want a wind wheel/rattling BB's. (plus some games dont allow highcaps.)
__________________
Currently modding AK. Loadout 1: Yugoslavian M76/Maadi RML Alternative (Kraken) CYMA Glock 18C Loadout 2: TM MP5 w/ flashlight CYMA Glock 18C Both Loadouts have Marpat Uniform, PASGT Helmet w/ Flecktarn, and Flecktarn chest rig. |
February 18th, 2010, 21:09 | #11 | |
Ministry of Peace
|
Quote:
It is actually quite easy to do, involved a small coping saw, no messing with the feed track and it was very simple to trim the spring. Very little work for a lot of gain More here: http://redcossack.ca/blog/?page_id=117 |
|
February 18th, 2010, 21:15 | #12 |
formerly Lythinca
Join Date: Oct 2008
Location: You know that Home Depot on King st? Yeah, no where near there.
|
What kind of AK mag is that? :S
__________________
Currently modding AK. Loadout 1: Yugoslavian M76/Maadi RML Alternative (Kraken) CYMA Glock 18C Loadout 2: TM MP5 w/ flashlight CYMA Glock 18C Both Loadouts have Marpat Uniform, PASGT Helmet w/ Flecktarn, and Flecktarn chest rig. |
February 18th, 2010, 21:17 | #13 | |
aka coachster
|
Quote:
I was gathering links prior to you posting, just so happens I hit reply starting typing and then got distracted. |
|
February 18th, 2010, 21:19 | #14 |
formerly Lythinca
Join Date: Oct 2008
Location: You know that Home Depot on King st? Yeah, no where near there.
|
I do actually appreciate you posting those links Coach. If I have to go with the hicap shorty mag, I will. But just for asthetics.
__________________
Currently modding AK. Loadout 1: Yugoslavian M76/Maadi RML Alternative (Kraken) CYMA Glock 18C Loadout 2: TM MP5 w/ flashlight CYMA Glock 18C Both Loadouts have Marpat Uniform, PASGT Helmet w/ Flecktarn, and Flecktarn chest rig. |
February 18th, 2010, 21:22 | #15 | |
* KNOWN LIAR *
|
Heres a 705mm barrel for ya
http://www.redwolfairsoft.com/redwol...l?prodID=23285
__________________
Quote:
|
|
|
Bookmarks |
Thread Tools | |
|
|