|
|
|
January 30th, 2011, 15:05
|
#16 |
|
Well the drop in kit is in stock at RA-Tech, so I think I'll go with that after what you said about the hop-up.
Thanks for the insight guys
__________________
WE SCAR TM M14 RWC G18C KWA P226 PTP X2 VFC/UMAREX MP5A2 |
|
|
|
February 13th, 2011, 17:45
|
#17 |
|
Just an fyi, the we scar open bolt kit has really really!!!!!! Strong recoil. I've smashed 2 hinge plates (part 66 on scar), with only 7 shots to each plate. Has anyone else installed the open bolt kit and have this issue. I will post pictures of the hinge plates tonight.
|
|
|
|
|
|
February 13th, 2011, 18:21
|
#18 | ||
|
Suburban Gun Runner
|
Quote:
__________________
Quote:
|
||
|
|
|
|
February 13th, 2011, 19:48
|
#19 |
|
Not surprised, GGI had few people where they break hinge plate within 1 mag. Don't shoot scar stock folded. It's the best solution, Second one is use hfc134a.
__________________
|
|
|
|
|
February 13th, 2011, 22:18
|
#20 | |
|
AKA ExtraExtra
|
Quote:
|
|
|
|
|
|
February 13th, 2011, 22:54
|
#21 |
|
I'm using GG mags in the basement. Both hinge plates were snapped shouldering the scar.
|
|
|
|
|
|
February 13th, 2011, 23:15
|
#22 |
|
Here are the hinge plates.
 
|
|
|
|
|
|
February 13th, 2011, 23:40
|
#23 | |
|
Suburban Gun Runner
|
What fps is it shooting at? And did you upgrade to a steel bolt ?
__________________
Quote:
|
|
|
|
|
|
February 13th, 2011, 23:50
|
#24 |
|
It is shooting at 415 average with .2's and the bolt is the one that came in the kit.
|
|
|
|
|
|
February 13th, 2011, 23:56
|
#25 | |
|
Suburban Gun Runner
|
Whats the serial number on the receiver?
__________________
Quote:
|
|
|
|
|
|
February 13th, 2011, 23:58
|
#26 |
|
for the black scar i have its 0000185 and for the tan scar it is 0000673
|
|
|
|
|
|
February 14th, 2011, 00:02
|
#27 | ||
|
Suburban Gun Runner
|
Quote:
 BINGO!!! There is your reason right there. Both those SCARS are gen1 and do now have any of the upgraded or reinforced parts that the current gen does.
__________________
Quote:
|
||
|
|
|
|
February 14th, 2011, 00:08
|
#28 |
|
Good to know! Now the next question would be, what was reinforced and where can I get it. I ordered 2 new hinge plates from Evike, will those be the next gen reinforced ones?
|
|
|
|
|
|
February 14th, 2011, 00:16
|
#29 | |
|
Suburban Gun Runner
|
The hinge plate, and the nozzle as well as the mag was changed. As well as some internal parts. I don't recall all as they are currently on gen3 SCARS. I suggest you read the AWSS thread on asc as well as go to gasgun info.
http://gasguns.info/forum/viewforum.php?f=7 There is bound to be an itemized list for you somewhere. And the new hinge plate is suppose to be reinforced. Avoid Evike like STDS. Good luck.
__________________
Quote:
|
|
|
|
|
|
February 14th, 2011, 01:05
|
#30 |
|
Great thanks for the advice. I don't mind buying from evike because I have a cousin in LA that knows the owner. So I just get her to pick it up and ship it to me
|
|
|
|
|
  |
|
||||||
| Bookmarks |
|
|
 |
|
