March 5th, 2012, 15:39 | #16 |
What is the preferred spring that could be effective both in CQB and Field. Just to avoid switching springs multiple times. Also to avoid losing gearbox parts in the process.
|
|
March 5th, 2012, 15:41 | #17 |
100
__________________
King Arms M4A1 Colt : ICS M4 C-15 : KJW G23 |
|
March 5th, 2012, 16:27 | #18 |
Cobalt Caliber
|
Another option is to rear wire it and get a crane stock.
|
March 5th, 2012, 16:57 | #19 |
Can I rear wire it without getting a new gearbox?
|
|
March 5th, 2012, 20:05 | #20 |
This can be done easily, but could be a bit tricky it's your first time working on an AEG.
If you decide to go through with it, it will make your life a bit easier. The front-wiring on this gun is a bit annoying since you have to always keep the entire upper close to the gearbox when you're working on it.
__________________
"Mah check" Now you know |
|
March 5th, 2012, 23:02 | #21 |
Is there a video for it?
|
|
March 5th, 2012, 23:25 | #22 | |
Quote:
For a gun to be effective outdoors, however, it does not need to have a higher FPS. You can have a gun shooting 320 FPS and still be more accurate and longer range than most guns shooting 400 FPS. In this case, having a good hop-up is very important. |
||
March 6th, 2012, 11:28 | #23 |
I read some posts that I can buy RIS handguards for it to fit the battery. King Arms CASV are pretty much sold out everywhere so looking into the A.C.M. one. I can import Rails systems right?
|
|
March 6th, 2012, 11:43 | #24 |
Cobalt Caliber
|
Yes, but the ACM is crap V.S. the King Arms one. Best bet? Pre-order it.
|
March 7th, 2012, 20:09 | #25 |
March 7th, 2012, 20:37 | #26 | |
Someone should seriously write a good review of this gun.. we get like 2 threads a week asking about it.
__________________
Quote:
|
||
March 8th, 2012, 00:20 | #27 |
G&P Makes something similar to the CASV rail called the "RAS II long version handguard kit". See if you can find something like that anywhere if you want that look. Otherwise a lot of people are going with the Madbull/Daniel Defense Lite rails (freefloat) or the Omega rails (delta ring mounted). Either that or if you want to be a bit different get a MRE rail which I think looks sexy if you want a SOPMOD-ish M4.
__________________
ಠ_ಠLess QQ more Pew Pew READY TO >> RACE |
|
March 8th, 2012, 00:23 | #28 |
hmm, i might be able to do that.. I just got home with one. First think I did was strip it completely down and make a list of components to upgrade to make it into the CQB death machine I have in mind..
I will say though, I am impressed with the quality. The metal parts are nice (and plentiful), the functioning bolt catch is a nice touch (not as satisfying as on my gas gun but oh well). Crane stock has some wobble to it but you could probably fix that easily enough. Most of the internals seem pretty darn good. The first thing I did was chrono it, and it was shooting 425 ootb. I hooked up my 11.1 to it and the response was incredible.. At 425 I was getting about 20 bps. Was not expecting that O.o If you wanted a decent all around game gun I'd replace the spring of course, the spring guide (cheap plastic with no ball bearing seat) and that's about it.. |
|
March 8th, 2012, 08:15 | #29 |
For the G&P RAS does it fit a nimh battery? My alternitive is to buy a rear wired trigger mechanism. Not sure if its the right one from the video in mechbox.com where he replaces the front wire trigger to a rear wire trigger ---> http://m.youtube.com/index?desktop_u...?v=pWoAmVCLk5U
http://ventureairsoft.ca/item.php?i=...1ac99867702c09 |
|
March 8th, 2012, 09:25 | #30 | |
Quote:
__________________
King Arms M4A1 Colt : ICS M4 C-15 : KJW G23 |
||
|
Bookmarks |
|
|