The Sig Signal Thread

Schlyder · November 16th, 2012, 10:12

....

CR0M · November 30th, 2012, 03:45

I almost sold this gun twice in the same week. I was set to sell it, then another buyer gave me a better offer, then he flaked.... THEN!... I recently bought some accessories for a M4 project that I wondered what would look like on the sig... and I fell in love all over again...

ics sig 551 ... mbus, angled foregrip, flashlight, silencer, cheek pouch. The rail on the front end was taken off the top of one of those m3000 shotguns and screwed into the top handguard with black screws...

TaroBear · December 13th, 2012, 12:36

Anybody else shave the connector nubs off their mags? I've been working at it all morning...jesus, even though it's brittle enough to snap if you drop the mags, they're not easy to take off with tools. I've been sanding and cutting, and I've still got a lot of stumps left over. Might need to take a dremmel to the mags to do it properly.

jordan7831 · December 13th, 2012, 15:40

Quote:

Originally Posted by TaroBear

Anybody else shave the connector nubs off their mags? I've been working at it all morning...jesus, even though it's brittle enough to snap if you drop the mags, they're not easy to take off with tools. I've been sanding and cutting, and I've still got a lot of stumps left over. Might need to take a dremmel to the mags to do it properly.

Dremal should have been your first choice! I cant tell you how much time I have saved over the years with a Dremal. Those little carbon cut off wheels are amazing at making quick work of hardened steel. Not that there is a lot of hardened steel in airsoft anyways. But I often replace pins and parts with steel equivalents.

Schlyder · December 16th, 2012, 16:23

I take them off. I used side cutters, and just crush/twist them off. Clean up/level with a razor blade.

Styrak · December 19th, 2012, 21:48

Quote:

Originally Posted by TaroBear

Anybody else shave the connector nubs off their mags? I've been working at it all morning...jesus, even though it's brittle enough to snap if you drop the mags, they're not easy to take off with tools. I've been sanding and cutting, and I've still got a lot of stumps left over. Might need to take a dremmel to the mags to do it properly.

Yup I took mine all off. Useless. They just get caught on pouches or other mags.

TaroBear · December 20th, 2012, 17:19

I should have done this first, but I just noticed that the rear nubs actually have screws inside the Marui/MAG nubs. Those should probably be unscrewed first. The G&G doesn't even bother with them.

TaroBear · December 20th, 2012, 17:33

Quote:

Originally Posted by Schlyder

I take them off. I used side cutters, and just crush/twist them off. Clean up/level with a razor blade.

Works like a charm. Genius.

Con Murder · December 20th, 2012, 17:36

Seeing this is making me feel crushed that my 552 has been down for so long! Arg! Okay so now that I am getting it up and running I remembered that I only have HI-caps cuz the MAG brand is so shitty. Where can I pick up some dummy round short and longs?

TaroBear · December 20th, 2012, 17:41

Quote:

Originally Posted by Con Murder

Seeing this is making me feel crushed that my 552 has been down for so long! Arg! Okay so now that I am getting it up and running I remembered that I only have HI-caps cuz the MAG brand is so shitty. Where can I pick up some dummy round short and longs?

The MAGS are actually pretty decent if you're willing to put in the work for them...they feel more solid than the Maruis. The G&G lowcaps look the best, if you want fake bullets.

Styrak · December 21st, 2012, 19:54

Quote:

Originally Posted by Con Murder

Seeing this is making me feel crushed that my 552 has been down for so long! Arg! Okay so now that I am getting it up and running I remembered that I only have HI-caps cuz the MAG brand is so shitty. Where can I pick up some dummy round short and longs?

MAG brand are good mags...

Bazz · December 22nd, 2012, 00:33

localfreerider · December 22nd, 2012, 23:28

Here is a teaser of my PGC P226 NAVY, It has been finished but I will do a full review with better photos after the holidays.

There is no describing how nice the finished results are, you have to see one in person for yourself!

I will also toss my gun rag in tech list and see if there's any interest in me building custom guns for others on ASC

http://www.airsoftcanada.com/showthread.php?t=149201

Styrak · January 9th, 2013, 16:03

Prepare your panties ladies. Yes that's a real Sig rail. Link to fullsize pic underneath.
Now just to find a battery solution.....I'm thinking maybe a PEQ box or something similar.

http://i.imgur.com/bKLmx.jpg

Hectic · January 9th, 2013, 16:31

Quote:

Originally Posted by Styrak

Prepare your panties ladies. Yes that's a real Sig rail. Link to fullsize pic underneath.
Now just to find a battery solution.....I'm thinking maybe a PEQ box or something similar.

http://i.imgur.com/bKLmx.jpg

lipo in the rail/handguard?

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

November 16th, 2012, 10:12	#16
Schlyder IronOverlord Trader rating Join Date: Aug 2008 Location: Broadview,Saskatchewan	.... __________________ Last edited by Schlyder; November 30th, 2012 at 08:27..

November 30th, 2012, 03:45	#17
CR0M Trader rating Join Date: Nov 2010 Location: Hamilton	I almost sold this gun twice in the same week. I was set to sell it, then another buyer gave me a better offer, then he flaked.... THEN!... I recently bought some accessories for a M4 project that I wondered what would look like on the sig... and I fell in love all over again... ics sig 551 ... mbus, angled foregrip, flashlight, silencer, cheek pouch. The rail on the front end was taken off the top of one of those m3000 shotguns and screwed into the top handguard with black screws... __________________ WBR

December 16th, 2012, 16:23	#20
Schlyder IronOverlord Trader rating Join Date: Aug 2008 Location: Broadview,Saskatchewan	I take them off. I used side cutters, and just crush/twist them off. Clean up/level with a razor blade. __________________

December 13th, 2012, 12:36	#18
TaroBear Trader rating Join Date: Dec 2009 Location: Markham/Toronto	Anybody else shave the connector nubs off their mags? I've been working at it all morning...jesus, even though it's brittle enough to snap if you drop the mags, they're not easy to take off with tools. I've been sanding and cutting, and I've still got a lot of stumps left over. Might need to take a dremmel to the mags to do it properly.

December 20th, 2012, 17:19	#22
TaroBear Trader rating Join Date: Dec 2009 Location: Markham/Toronto	I should have done this first, but I just noticed that the rear nubs actually have screws inside the Marui/MAG nubs. Those should probably be unscrewed first. The G&G doesn't even bother with them.

December 20th, 2012, 17:36	#24
Con Murder Trader rating Join Date: May 2009 Location: Lethbridge Alberta Canada	Seeing this is making me feel crushed that my 552 has been down for so long! Arg! Okay so now that I am getting it up and running I remembered that I only have HI-caps cuz the MAG brand is so shitty. Where can I pick up some dummy round short and longs? __________________ Con Murder Dark Rhino L.A. Airsoft

December 22nd, 2012, 00:33	#27
Bazz Trader rating Join Date: Nov 2012 Location: Edmonton, AB

December 22nd, 2012, 23:28	#28
localfreerider willing to perform services in a dark alley that may or may not leave you satisfied for a title. GFE = 1, looks = 2, BBFS for an extra $50. Trader rating Join Date: Oct 2005 Location: Never gonna let you down	Here is a teaser of my PGC P226 NAVY, It has been finished but I will do a full review with better photos after the holidays. There is no describing how nice the finished results are, you have to see one in person for yourself! I will also toss my gun rag in tech list and see if there's any interest in me building custom guns for others on ASC http://www.airsoftcanada.com/showthread.php?t=149201 Last edited by localfreerider; January 2nd, 2013 at 20:06..

January 9th, 2013, 16:03	#29
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	Prepare your panties ladies. Yes that's a real Sig rail. Link to fullsize pic underneath. Now just to find a battery solution.....I'm thinking maybe a PEQ box or something similar. http://i.imgur.com/bKLmx.jpg __________________ Airsoft Sales and Repair/Upgrade Services Last edited by Styrak; January 9th, 2013 at 16:06..

The Sig Signal Thread

Airsoft Media