Do i... MOSFET w/ VFC 416 CQB + 11.1v ??

[War-Lock]

I've already ran about 4000 bb's maybe 3200 on semi on my new VFC 416 with the 11.1v

when the new MOSFET comes in. And the gun is in pieces. (maybe in a few weeks) ((im still going to shoot))

Can i snoop in another 1000 rounds?

- Is there a threshold of use it can endure before performance start to deteriorate? -


-Can the "muck" be cleaned off? Restoring the contacts.

O:

[ThunderCactus]

You can always clean the contacts, it's not a big issue on semi, although semi causes more arcing than full so it fouls faster.
But long full auto bursts cause the trigger block to melt.

[lurkingknight]

lipo ready is a BS marketing term.

all guns blow up, it's a matter of how soon you want it to blow up.

any gun can run a 7.4 lipo... that's not any more stressful than a 9.6 nimh. Be lazy with trigger pulls and you'll burn your contacts faster, pull fast and with purpose, it won't arc as much.

If you want to do 20-35 rps mag dumps with 11.1v lipos all day long, then we're talking some custom work... no gun can deal with that. At the very lease a good shim job, sorbo and aoe adjustment.

I like vfc guns, I hate their self shimming gears. pulling the spring collars off makes them even weirder to shim, and I'd just as soon pull the gear set and put in a different one just so I can shim it right. I just worked on a vfc 416, it's going to run 7.4s on a lonex a1 for the next little while, I tried to shim those gears but in the end, decided that it was best to just leave the self shimming junk in there, the piston showed no signs of wear or PE, it's just the self shimming stuff drags the gear train and seems be noisy in general compared to a well shimmed box. Other than that, it seems to work, but you're telling me that tiny little spring can hold the torque of an aeg motor? yeah no.

The one thing the vfc gears seem to have going for them is that they are fucking WIDE. That's probably why the self shimming gears don't blow up.. it's because they're so damn wide the gear mesh can be sloppy and still be ok.

[RaisinBran]

Originally Posted by ThunderCactus

You can always clean the contacts, it's not a big issue on semi, although semi causes more arcing than full so it fouls faster.
But long full auto bursts cause the trigger block to melt.

Not if you use the super heat resistant deep fire switch!

Just kidding, mine just melted on a test build.

[ThunderCactus]

Originally Posted by lurkingknight

lipo ready is a BS marketing term.

Also misleading, as ALL guns are 7.4v lipo ready lol
On the topic of BS marketing terms, I love that Marui put "SEALS" on the SIG 552....Seals don't use assault rifles, but maybe they should...to fight off polar bears...

[PrIeSt]

When will we have these things setup to stop trigger bouncing Stupid micro triggers.

[ThunderCactus]

Just convert to full auto only on a button switch already =p
Eventually someone like you (hint hint) will build an optic board like the PTW to fit in a P90 so we can all have 3mm trigger pulls!
Cause the P90 and AUG triggers are just the worst things ever. I dunno how anyone deals with them -_-

[PrIeSt]

I have a fet in thé p90 it's the Acr I can't get one in.

Sent from my HTC One using Tapatalk 2