Taiwan made metal slide for Marui 1911

Rob · July 28th, 2006, 16:04

the pictures make the slide look almost black, but it surprisingly matches the frame http://www.uncompany.com/pageproduct...sp?prodid=7853

Kid · July 28th, 2006, 16:47

Quote:

Originally Posted by Rob

the pictures make the slide look almost black, but it surprisingly matches the frame http://www.uncompany.com/pageproduct...sp?prodid=7853

Surprisingly enough, that doesn't look half bad at all.

The filled upper slide means that the stock one can be used for parts too, or the Tiawan slide can be used as parts, either way. The silver chamber looks pretty nice too. Color is good, trades are.. ok.

Shinjin_MC · July 28th, 2006, 17:02

Quote:

Originally Posted by Rumpel Felt

Ya I know I know, but the point is for a person like me who can't stand a plastic toyish remake, it boils down to me paying hundreds for a plastic frame that probably costs them a couple bucks to make, crammed with a few little parts. Then I have to bloody well buy a frame and slide to make it realistic (to my standards) Someone aught to start copying their internals and stick it to them for; I'll build my own gun.

Anyway, back to this topic, sorry about that. Hopefully there will be an aluminum set to come out sometime and I'll consider blowing another 500~ish on this too.

R&D to churn out said plastic parts does cost a bit more than a couple bucks

Raw Deal · July 28th, 2006, 19:23

The trades are ultra garbage. I would rather have plastic than filled in 1911A1 trades.Looks so..airsoft, someone will bring out a correct slide soon. :salute:

Oz · July 28th, 2006, 19:56

Its a 1911... I wouldnt waste money on just a slide. Counting down the days until somebody releases the slide and frame kit.

Besides, why drop the cash on TM quality and drop it down with a shite slide? Sure its cheap... but its cheap.

The Saint · July 28th, 2006, 22:26

Can anyone else hear WE's calipers sinisterly scraping across the pure, innocent plastic flesh of the TM1911, violating its virgin dimensions one imprecision measurement after another?

ILLusion · July 28th, 2006, 22:40

Quote:

Originally Posted by Rumpel Felt

Ya I know I know, but the point is for a person like me who can't stand a plastic toyish remake, it boils down to me paying hundreds for a plastic frame that probably costs them a couple bucks to make, crammed with a few little parts. Then I have to bloody well buy a frame and slide to make it realistic (to my standards) Someone aught to start copying their internals and stick it to them for; I'll build my own gun.

Anyway, back to this topic, sorry about that. Hopefully there will be an aluminum set to come out sometime and I'll consider blowing another 500~ish on this too.

Yup, research & development and tooling should be free and cost the end user nothing on the product's final sticker price! Those scam artists!!!

Why are full metal offerings so cheap? Because they don't have to do any development. All they have to do is COPY the work performed by TM.

Grim Fandango · July 29th, 2006, 05:26

Quote:

Originally Posted by The Saint

Can anyone else hear WE's calipers sinisterly scraping across the pure, innocent plastic flesh of the TM1911, violating its virgin dimensions one imprecision measurement after another?

Exactly. Hell WE slides already violate WE frames. Man so many WE breakdowns outta the box. I suggest anyone wanting a metal slide for there TM 1911, wait a while for a respectable company to come out with a metal slide.

Pt. Thomas · March 28th, 2007, 15:05

M1911=american beauty

Goldman · March 28th, 2007, 15:27

Quote:

Originally Posted by Pt. Thomas

M1911=american beauty

Holy NecroPost!

manchovie · March 28th, 2007, 15:30

god my poor eyes. you get what you pay for. i wonder if it fits without extreme mods. i believe the pgc kit costs $168US which is totally fair considering you get beautiful engraved trades as well as a frame. i just kitted out a 1911 with a pgc kit and guarder spring set here at the shop and it puts any gun i've seen before to complete shame. it's amazing looking and somehow doesnt run out of gas on a full mag (26rds) lets see your taiwan asscock piece of vag WE pull that off.

ollie · April 6th, 2007, 10:51

it's cheap cause it's from Taiwan...Domestic Marui pistol copies are about $60 bucks Canadian here in Taipei...You should see all the crap you can get here though! Check out www.intrudershop.com.tw for some cheapies-they ship overseas too!

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

July 28th, 2006, 19:23	#19
Raw Deal Trader rating Join Date: Apr 2005 Location: Taranna	The trades are ultra garbage. I would rather have plastic than filled in 1911A1 trades.Looks so..airsoft, someone will bring out a correct slide soon. :salute: __________________ Gary Paul Johnston: on selecting a new MEU (SOC) 1911 pistol-Whatever happens,there's no doubt that a "few good men" will once again carry the finest combat pistol in the world and we can only pray that a lot of bad men will regret it. Coyote tan is the new black...

July 28th, 2006, 22:26	#21
The Saint Trader rating Join Date: Jan 2005 Location: Quebec	Can anyone else hear WE's calipers sinisterly scraping across the pure, innocent plastic flesh of the TM1911, violating its virgin dimensions one imprecision measurement after another? __________________ "The Bird of Hermes is My Name, Eating My Wings to Make Me Tame."

March 28th, 2007, 15:30	#26
manchovie Trader rating Join Date: Dec 2003 Location: Toronto	god my poor eyes. you get what you pay for. i wonder if it fits without extreme mods. i believe the pgc kit costs $168US which is totally fair considering you get beautiful engraved trades as well as a frame. i just kitted out a 1911 with a pgc kit and guarder spring set here at the shop and it puts any gun i've seen before to complete shame. it's amazing looking and somehow doesnt run out of gas on a full mag (26rds) lets see your taiwan asscock piece of vag WE pull that off. __________________ experienced toronto gun doctor, hundreds of guns serviced manchovie gun doc thread! my b/s rating

July 28th, 2006, 16:04	#16
Rob Trader rating Join Date: Dec 2002 Location: Vancouver, BC	the pictures make the slide look almost black, but it surprisingly matches the frame http://www.uncompany.com/pageproduct...sp?prodid=7853

July 28th, 2006, 19:56	#20
Oz Trader rating Join Date: Mar 2003 Location: Vancouver	Its a 1911... I wouldnt waste money on just a slide. Counting down the days until somebody releases the slide and frame kit. Besides, why drop the cash on TM quality and drop it down with a shite slide? Sure its cheap... but its cheap.

March 28th, 2007, 15:05	#24
Pt. Thomas Trader rating Join Date: Feb 2007 Location: at home	M1911=american beauty

April 6th, 2007, 10:51	#27
ollie Trader rating Join Date: Jul 2006 Location: Winnipeg	it's cheap cause it's from Taiwan...Domestic Marui pistol copies are about $60 bucks Canadian here in Taipei...You should see all the crap you can get here though! Check out www.intrudershop.com.tw for some cheapies-they ship overseas too!

Taiwan made metal slide for Marui 1911

Airsoft Guns Discussion