Removing Stock from M-3081A Electric Plastic Boyi

031247 · August 29th, 2007, 23:45

yea but its seems to be locked in dosen't even budge so since its made of plastic it will probley snap before it releases

TokyoSeven · August 29th, 2007, 23:55

Hmmm....no screws anywhere at all that look like they come off either eh?

031247 · August 30th, 2007, 00:43

there are screws on other side of it but i tried taking off screws no good

Tex · August 30th, 2007, 00:58

ok the problem is that this is a very low end gun. the stock does not come off the way we all think and know it should. the stock and tube come off as one. My guess is there are tabs inside (of the part you circled) that stop it from being pulled up.

Lakonian · August 30th, 2007, 01:13

Quote:

Originally Posted by TokyoSeven

Dont be afraid to give it a little elbow grease.
I know on my TM m4, she dont come off unless I giver a good yank.
Basically I sit on the couch with the M4 on my lap. I pull down on the stock slider grip and then pull off the stock backwards, but she takes a good rip to get it off.

I don't come (off) unless I receive a good yank, too! lol

I don't know too much about this brand, but it seems like it should come apart like any other AR Aeg..

031247 · August 30th, 2007, 01:24

Quote:

Originally Posted by Tex

ok the problem is that this is a very low end gun. the stock does not come off the way we all think and know it should. the stock and tube come off as one. My guess is there are tabs inside (of the part you circled) that stop it from being pulled up.

yea thats what i am thinking like a spring based lock trigger inside i was gonna ship it to a friend because he wanted it, Was my first airsoft gun. It will not fit in the box until the stock is removed so thats the problem i am facing right now

acidburn149 · August 31st, 2007, 02:16

Quote:

Originally Posted by 031247

yea thats what i am thinking like a spring based lock trigger inside i was gonna ship it to a friend because he wanted it, Was my first airsoft gun. It will not fit in the box until the stock is removed so thats the problem i am facing right now

Sawzall perhaps????
haha im joking....

no really hit it with the sawzall that will get it off!!!

JoeyJackhammer · September 5th, 2007, 23:39

remove the roll pin, remove lever assembly and then remove the stock.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

August 29th, 2007, 23:55	#17
TokyoSeven Red Wine & Adderall Trader rating Join Date: Oct 2005 Location: Saskatoon, SK	Hmmm....no screws anywhere at all that look like they come off either eh? __________________ "Its only a little bit on fire"

September 5th, 2007, 23:39	#23
JoeyJackhammer Trader rating Join Date: Jun 2004 Location: Moose Jaw, SK	remove the roll pin, remove lever assembly and then remove the stock. __________________

August 29th, 2007, 23:45	#16
031247 Trader rating Join Date: Jul 2007	yea but its seems to be locked in dosen't even budge so since its made of plastic it will probley snap before it releases

August 30th, 2007, 00:43	#18
031247 Trader rating Join Date: Jul 2007	there are screws on other side of it but i tried taking off screws no good

August 30th, 2007, 00:58	#19
Tex Trader rating Join Date: Feb 2003 Location: Abbotsford, B.C.	ok the problem is that this is a very low end gun. the stock does not come off the way we all think and know it should. the stock and tube come off as one. My guess is there are tabs inside (of the part you circled) that stop it from being pulled up.

Removing Stock from M-3081A Electric Plastic Boyi

Doctor's Corner