|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
May 29th, 2008, 13:54
|
#16 |
|
Tys
|
Any thoughts/comments on the following parts (Redwolf partnumbers)?
JB Comp Set for Hi-Capa 5.1 - PDI-ACC-COMPSM51 Airsoft Surgeon Super Light Weight Speed Blow Back Housing for Marui Hi-Cap & 1911 - AS-ACC-BBH-HICAP1911 Shooters Design Metal Rear Sight Type B For Marui Hi Capa 5.1 Government - GSMS929B PDI Jaggy Trigger Type 3 for Marui Hi-Capa 5.1 / 4.3 - PDI-4560249633781 |
|
|
|
May 29th, 2008, 14:23
|
#17 |
|
JB-Comp: I don't have experience with that particular comp, but I do have another PDI comp and it has worked out ok. Good quality and all. They do tend to come loose once in a while because they are using set-screws to clamp onto the extended inner barrel, and the slide movement tend to rattle it loose over time.
AS BBU: Good purchase for me, though if you have an aftermarket nozzle like mine(SD POM Nozzle) you might want to consider getting a SD piston and use the o-ring from that piston with the BBU's included piston. The AS BBU o-ring is a tad small for the nozzle. The housing do increase the cycling rate of the gun, especially useful if you have a metal slide upgrade. On plastic slide the limiting factor maybe your rate of trigger pull....note that the "kick" is also reduced. SD rear sight: Noting from the experience of of member "Romulus" from Arnie's this does not seem to be that worth while of a purchase, though I am not sure which exact SD rear sight he bought. Note that I believe this only comes with the rear sight blade portion, not the whole rear sight. Not sure about the trigger, though trigger replacement and fitting is a simple enough process that I don't think any can go wrong... |
|
|
|
|
May 29th, 2008, 14:25
|
#18 |
|
|
BTW, I think this CAPS thing is Phil's way of making everyone poor and broke....just look at the number of tricked out Hi-Capa project going on around here....
|
|
|
|
|
May 29th, 2008, 14:42
|
#19 |
|
Tys
|
Thanks! Yep...this is going to bankrupt me. But it's not really Phil's fault...I just can't leave well enough alone.
The rear sight blade is just an add on, got carried away looking at Redwolf's sight...I was really just looking for a comp (and not for the most expensive freaking one either!). Good comments on the parts, as a GBB newbie I really do appreciate it. Tys |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
