Crosman Stinger S34P shotgun on sale at Canadian Tire

Doombringer · June 13th, 2009, 12:50

Quote:

Originally Posted by Silverthorn

Run because I visited 3 canadian tire and managed to only get one. Other were out (or never even had one).

Which one you went to so I can avoid the trouble of finding which one dosent have any... ?

L473ncy · June 13th, 2009, 13:46

Doombringer:

Just go to the website and check if they have the shotgun "in stock". Hopefully their stock reflects the website.

Silverthorn · June 13th, 2009, 13:49

Quote:

Originally Posted by Doombringer

Which one you went to so I can avoid the trouble of finding which one dosent have any... ?

ville st-laurent, st-bruno and boucherville.

Silverthorn · June 13th, 2009, 13:51

Quote:

Originally Posted by sixb0nes

Thanks OP!

Should be a fun project gun for a noob who wants to tinker.

I wouldn't dare tinker too much with it. I opened mine yesterday to paint the clear pieces and the plastic is pretty low quality. Around some of the screws the plastic is cracked. Has no effects on usage or durability once it's all assembled but too much screwing and unscrewing will break it I think.

Doombringer · June 13th, 2009, 14:04

Quote:

Originally Posted by L473ncy

Doombringer:

Just go to the website and check if they have the shotgun "in stock". Hopefully their stock reflects the website.

On the website it just tells me to call the store for more info

sixb0nes · June 13th, 2009, 14:21

Quote:

Originally Posted by Silverthorn

I wouldn't dare tinker too much with it. I opened mine yesterday to paint the clear pieces and the plastic is pretty low quality. Around some of the screws the plastic is cracked. Has no effects on usage or durability once it's all assembled but too much screwing and unscrewing will break it I think.

You're telling me! Here's my luck after a few test fires:

Malice Army · June 13th, 2009, 16:16

sand the area abit and brush on a couple coats of fibreglass resin (found in automotive@CT) once dry the plastic will be substantially stronger and make sure the weak area that is cracked is strengthened. Sand it down smooth, apply choice of paint.

ShelledPants · June 13th, 2009, 18:57

So, I bought one last night to go to TTAC3, as my only other gun right now is an m14...

Fucking awesome little gun. Works just like the TM, but has a way stronger pull on the spring. Shouldn't be shooting too hot, but I had a couple o guys I hit pretty close center mass and there was cussing and doubling over. Not something I'm used to. So this is my new favorite sub $100 toy. I'll be buying some more shells this week and building a breacher.

So far I've sawed the barrel down to be equal to the shell tube (and in turn removed the orange cap), I've painted the clear OD and left the stock black parts black.

I've found that I REALLY like the texture of the rubberized parts (the foregrip and pistol grip). My arms, I won't lie, hurt after a 4 hour game with this gun. It makes you feel like you're a man.

Stop bitching, go buy one, best gun under $100 by a LONG shot.

oOMuDOo · June 13th, 2009, 20:13

please post yours painted.... guys.

I still have to paint mine. Id like to see how you did it.
I have not yet decided how to paint mine.

ShelledPants · June 13th, 2009, 20:17

Quote:

Originally Posted by oOMuDOo

please post yours painted.... guys.

I still have to paint mine. Id like to see how you did it.
I have not yet decided how to paint mine.

http://www.airsoftretreat.com/forums...?topic=53939.0

follow this guide and remove ONLY the foregrip and the rear pin to take the whole pistol grip off.

NOTE: For the left side of the foregrip, of the three screws, it's only the middle one, you'll know what I mean when you get to that step.

Then, mask the black areas of the gun with masking tape, then spray like any other gun. It worked really well.

I'll post a pic later when I get my usb cable for the camera.

ShelledPants · June 13th, 2009, 20:27

Here's a quickie shot with the sawed barrel and od paint. Took about 20 minutes to do (including dry time... lol)

Forever_kaos · June 13th, 2009, 23:13

Picked up one few hours ago. Loving it so far.

Thanks to some jackass... The closest store to me just sold out a few days ago.
*Cough*

Quote:

Originally Posted by sixb0nes

Thanks OP!

Picked up the last one at the London South location (Wonderland). Should be a fun project gun for a noob who wants to tinker.

Redflagdeals follows me wherever I go!

hahah! Cheers man.

Mitchell12 · June 13th, 2009, 23:26

Hmm. I think I might get one for parts seeing as the main part I need to fix my TM is 60 bucks + shipping from HK. Definatley worth it.

surebet · June 14th, 2009, 20:56

Picked mine up earlier this afternoon, thanks OP. If anyone is the South Shore region is looking for one, they still had 16 at the St-Bruno store. My advise would be to call and ask them to physically verify that they are still in stock.

Also ask someone to fetch one from the back if none are on the floor. There might not be any left because the kiddies also passed the word around.

capitalairsoft.ca also has the stocks available, though I picked up the last retractable one.

oOMuDOo · June 14th, 2009, 21:20

Quote:

Originally Posted by surebet

though I picked up the last retractable one.

There is a retractable version?!

where are they available?

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

June 13th, 2009, 13:46	#17
L473ncy Trader rating Join Date: Oct 2004 Location: 11-30-24-1W5	Doombringer: Just go to the website and check if they have the shotgun "in stock". Hopefully their stock reflects the website. __________________ ಠ_ಠLess QQ more Pew Pew READY TO >> RACE

June 13th, 2009, 18:57	#23
ShelledPants Trader rating Join Date: Feb 2008 Location: Toronto, On	So, I bought one last night to go to TTAC3, as my only other gun right now is an m14... Fucking awesome little gun. Works just like the TM, but has a way stronger pull on the spring. Shouldn't be shooting too hot, but I had a couple o guys I hit pretty close center mass and there was cussing and doubling over. Not something I'm used to. So this is my new favorite sub $100 toy. I'll be buying some more shells this week and building a breacher. So far I've sawed the barrel down to be equal to the shell tube (and in turn removed the orange cap), I've painted the clear OD and left the stock black parts black. I've found that I REALLY like the texture of the rubberized parts (the foregrip and pistol grip). My arms, I won't lie, hurt after a 4 hour game with this gun. It makes you feel like you're a man. Stop bitching, go buy one, best gun under $100 by a LONG shot. __________________ Ár skal r?*sa, sá er annars vill fé eða fjör hafa. Sjaldan liggjandi úlfur lær um getur né sofandi maður sigur.

June 13th, 2009, 20:13	#24
oOMuDOo Trader rating Join Date: Apr 2004 Location: Cochrane, AB	please post yours painted.... guys. I still have to paint mine. Id like to see how you did it. I have not yet decided how to paint mine. __________________

June 13th, 2009, 16:16	#22
Malice Army Trader rating Join Date: Jun 2008 Location: St. Catharines ON	sand the area abit and brush on a couple coats of fibreglass resin (found in automotive@CT) once dry the plastic will be substantially stronger and make sure the weak area that is cracked is strengthened. Sand it down smooth, apply choice of paint.

June 13th, 2009, 20:27	#26
ShelledPants Trader rating Join Date: Feb 2008 Location: Toronto, On	Here's a quickie shot with the sawed barrel and od paint. Took about 20 minutes to do (including dry time... lol) __________________ Ár skal r?*sa, sá er annars vill fé eða fjör hafa. Sjaldan liggjandi úlfur lær um getur né sofandi maður sigur.

June 14th, 2009, 20:56	#29
surebet Vicious MSPaint Wizard Trader rating Join Date: Aug 2004 Location: Longueuil, Quebec	Picked mine up earlier this afternoon, thanks OP. If anyone is the South Shore region is looking for one, they still had 16 at the St-Bruno store. My advise would be to call and ask them to physically verify that they are still in stock. Also ask someone to fetch one from the back if none are on the floor. There might not be any left because the kiddies also passed the word around. capitalairsoft.ca also has the stocks available, though I picked up the last retractable one. __________________ Annoyingly good with numbers Stop American Censorship

Crosman Stinger S34P shotgun on sale at Canadian Tire

Airsoft Guns Discussion