January 16th, 2011, 13:06 | #31 |
How was the MP9 compare with the KWA M11 ingram as far as performance sound and rate of fire. Watching videos they seem similar. And both seem to have Canadian versions.
How does the Canada Mp9 look, i haven't found a site that shows it yet. the smoked grey looks fine on the M11 Correction: I guess i was mis-informed of a canadian version of mp9 Last edited by puppydg68; January 17th, 2011 at 02:45.. |
|
January 16th, 2011, 13:19 | #32 |
Where have you seen a cansoft MP9?
__________________
Not for glory, nor riches, nor honours, but for freedom alone, which no good man gives up except with his life. |
|
January 16th, 2011, 20:50 | #33 |
there's no cansoft mp9
__________________
how can you help someone else if they're not willing to help themselves. |
|
January 16th, 2011, 21:29 | #34 |
The mp9 hAs a way faster rate of fire and way Better cool down control.... The mags hold a tonne of gas and the gun is rock solid way better than the mac11 IMO
__________________
|
|
January 17th, 2011, 08:49 | #35 |
I have a kwa m11 as well and I'd have to day the kmp9 is waaaaay louder.
|
|
January 17th, 2011, 13:43 | #36 |
January 17th, 2011, 14:03 | #37 |
the kick on the mp9 is greater and louder than kwa m11 ns2.
__________________
how can you help someone else if they're not willing to help themselves. |
|
January 17th, 2011, 18:07 | #38 |
formerly Omega!
|
Again, I can only speak from the KSC experience, but the MP9 is the loudest, meanest GBB SMG you can get. It's accurate, loud and kicks harder than any other GBB SMG I've held (except for full auto pistols).
__________________
"History shall be kind to me, for I intend to write it." - Sir Winston Churchill |
January 17th, 2011, 21:25 | #39 |
Hey all, I have a question about the MP9: The rail on the side is wobbly, and I don't really know if there's a way to tighten it. There's no screws or anything holding it to the body. Is there a way or am I out of luck on it?
Thanks! |
|
January 17th, 2011, 21:31 | #40 |
formerly Omega!
|
According to the manual there are 2 hex screws that you can adjust on the inside of the upper receiver. Just take it off and tighten them and you should be okay.
__________________
"History shall be kind to me, for I intend to write it." - Sir Winston Churchill |
January 17th, 2011, 21:39 | #41 |
Thanks for the help. I'll give that a try!
|
|
January 18th, 2011, 09:12 | #42 |
Banned
|
Finalized the deal! My KWA is coming...yeah! Anyone determine the best source for extra mags? My mag order from eHobby just took 3 weeks so that's not really my first option. Any Canadian retailers that might have stock?
|
January 21st, 2011, 12:20 | #43 |
oO?
|
Fantastic gun. amazing rate of fire. build quality externally is spot on.
...internals... well lets just say i got a lemon? One reason you may want to think twice about an MP9, This is after 8 mags of regular use. nothing special. room temperature about 15-20 celcius. half way through the 9th mag, the gun stopped feeding and did not cycle properly. after proper take down, this is the horror! I question the durability of this part.. it is not very robust for a high-cycle gbb smg Sorry for any broken pipe dreams...
__________________
"SI VIS PACEM, PARA BELLUM" Last edited by Nocturnal; January 21st, 2011 at 12:24.. |
January 21st, 2011, 12:50 | #44 |
I completely agree with you. I bought a broken m-11 from Amos that had broken in the exact same spot. The replacement part is pretty cheap, but it appears as if it's a common problem amongst their NS2 system.
__________________
Not for glory, nor riches, nor honours, but for freedom alone, which no good man gives up except with his life. |
|
January 21st, 2011, 13:05 | #45 |
So the loading nozzle broke?
That should be a pretty cheap part to replace. |
|
|
Bookmarks |
|
|