VFC scar (mk16/17) Owners

[Doctorpepper]

I have a VFC FN scar l tan and i live it! The only problem i had with it was the electrical wiring right away so i bypassed te fuse and now its workig great!!

[silentownage001]

perfect info much appreciated. whats the stock barrel's diameter and how easy is it to replace?

lanepratt: if its not too much trouble could you post a pic of them?

heres the trades

edit: hmm image wont pop up for me so cant really see them. heres the link
http://www.airsoftgi.com/product_inf...oducts_id=9594

i havent been here in ages and forget if its against the rules to post links to retailers lol. one forum is because its owned by a retailer

[lanepratt]

Originally Posted by silentownage001

perfect info much appreciated. whats the stock barrel's diameter and how easy is it to replace?

lanepratt: if its not too much trouble could you post a pic of them?

heres the trades

stock inner diameter is between 6.04-6.06 i think, yes its easy to replace, there are 6 torque head screws you have to remove and one body pin the lower receiver comes off and once the torque screws are undone the whole barrel assembly comes out, then there are two small allen key screws that holds the hop up unit in to the outer barrel loosen them then the hop up and inner barrel comes out, simply remove the clip holding the barrel in the hop up pull the inner barrel out gently be careful not to tear the rubber. Put the rubber on the new tight bore and re assemble.

What pictures were you looking for?

edit: minus the made in tiawan the trades are correct

[silentownage001]

ahh thanks sounds easy enough. figured the made in taiwan wasnt official.
if you could post pics of your scars

[lanepratt]

Yea can do that when i get home. I have a Scar H and a Scar L both VFC

[mr_nuts31]

had mine since 2009 ran it through quite a bit of games with it. Even left it outside overnight when it was raining, scary enough it still works perfectly. The only damage I ever did to it was one of the connectors to the fuse broke, but that was easily fixed. Sure it was expensive to get at the time, but I look back to it and realize it was worth it mainly because of all the aegs I own, my VFC SCAR L didn't need to be modified because there was nothing wrong with it.

[Doctorpepper]

As i said in a Pos before i have a VFC scar l and im looking to upgrade some parts in it. I want to get a better hop up and motor, but as this being me first aeg im not sure what are good upgrade units for i, anyone got and ideas?

[kyle milliken]

Originally Posted by Doctorpepper Airsoft NB

As i said in a Pos before i have a VFC scar l and im looking to upgrade some parts in it. I want to get a better hop up and motor, but as this being me first aeg im not sure what are good upgrade units for i, anyone got and ideas?

you can't upgrade the hop up but for motors i heard good things about matrix 3000 magnum motors.

[Danke]

Put a guarder clear hop up rubber in it.

[Doctorpepper]

Alright thanks!

[White Fox]

I have a VFC scar-l running 11.1 lipo / raptor unit

My piston teeth got annihilated in approximately 200 rounds



I changed it for a modify quantum piston and so far so good



other internals are good, but I hate the ambidextrous selector switch. I always need to switch on the 2 sides at the same time.

[wobblypop]

Originally Posted by silentownage001

ahh thanks sounds easy enough. figured the made in taiwan wasnt official.
if you could post pics of your scars

Here is a shitty pic of the trades on my VFC Scar H... hope it helps.



Uploaded with ImageShack.us

[Doctorpepper]

Yeah the selector switch is garbage lol i wanna change it. I just wanna get good internals in it. So the piston should be switched? I wanna make it able to shoot .30s for a good distance im also looking in invest is a mosfit unit but one thats sauthered in not one that clips onto the battery

[wobblypop]

Oh and here is a link to a Scar media thread on asc... a lot of pics there
http://airsoftcanada.com/showthread.php?t=92457

[silentownage001]

hey wobblypop i was wondering about extra mags for the scar h. how much were they? airsoftgi have single 160rd mids for 30 bucks or a 3 pack of 190rds for 90... what about pouches? easy to find?

do you know how long the inner barrel is?

http://www.airsoftgi.com/product_inf...oducts_id=9595

based off the last pic of the black flash hider which i suppose is included how close is it to the real steel version? compared to the dboy version

http://www.airsoftgi.com/product_inf...oducts_id=9616

looking here on wiki it looks like vfc include the correct flash hider
http://en.wikipedia.org/wiki/File:FN_SCAR_rifle.jpg

but this makes the dboys like correct
http://guns.wikia.com/wiki/FN_SCAR-H