WETTI/AWSS - M4/SCAR/HK416 - Technical Summary Thread

Stealthee · November 12th, 2010, 13:47

Alright so I am having the same problem as Ross with the BB jamming. I haven't tried lubing that part yet, but if it still jams when lubed, then I may need to trim the rubber chamber down or get a replacement.

wildcard · November 12th, 2010, 14:05

Quote:

Originally Posted by fumoffu

Hey guys,

Cant find a o rings replacement for the top valve for we mags. Do anyone know where is a good place to buy replacement o-rings?

Cheers,
David

Try Frank at velocity arms he is the authorised WE distributor

Shrapnel[Op-For] · November 17th, 2010, 00:09

So I feel stupid for asking this..

I disassembled and cleaned my m4, but when I was re-assembling it, I forgot to put the buffer spring back in. I then racked the slide.. and the bolt is now stuck back. I can't get it out, and the gun cannot be opened. Please help me..

ShelledPants · November 17th, 2010, 00:11

Quote:

Originally Posted by Shrapnel[Op-For]

So I feel stupid for asking this..

I disassembled and cleaned my m4, but when I was re-assembling it, I forgot to put the buffer spring back in. I then racked the slide.. and the bolt is now stuck back. I can't get it out, and the gun cannot be opened. Please help me..

Seen it done. Done it myself. It's the most instant fml moment any WE owner will have.

You have to remove the castle nut, remove the buffer tube. Pop both locking pins (on the body). and wiggle the gun until it free's up.

It is a serious son-of-a-bitch annoyance when cleaning. Don't do it again. :P

Shrapnel[Op-For] · November 17th, 2010, 00:22

Quote:

Originally Posted by ShelledPants

Seen it done. Done it myself. It's the most instant fml moment any WE owner will have.

You have to remove the castle nut, remove the buffer tube. Pop both locking pins (on the body). and wiggle the gun until it free's up.

It is a serious son-of-a-bitch annoyance when cleaning. Don't do it again. :P

Thanks.. that did the trick. Maybe something that could be added in as a side note to the cleaning guides for idiots like me?

Shrapnel[Op-For] · November 17th, 2010, 00:29

edit: please delete post.

Cushak · November 24th, 2010, 01:13

quick question; I recently got a WE GBBR used from a buddy (it's a lower clear M4 version.)

I just got in the mail a RA Tech NPAS kit (version 2 for WE M4), stinger hop up kit for we M4 and fire pin base w/ valve locker (as well as a TSC charging handle and a thread adapter.)

I also picked up an RA tech hop-up rubber (says for open bolt system/GBBR, but didn't see any rubbers for close bolt - I think mine's a closed bolt) and an RA tech inner barrel.

However, the barrel I ordered is set-up differently than the rubbers. Now, normally I would just tear down the gun to install the Stinger kit to see whether I have the right hop-up, or the right barrel and order the other. However, my upcoming week is extremely busy and I don't think I'll have the time for that, but I'd like to order whatever I need to make it work so it's here for when I do have time.

Now I'm sorry if this has been answered here or elsewhere (or if this question doesn't belong here), but I've seen nothing mentioned, but if it is a new rubber I need, where would I be able to get one for that barrel? I've look all over, ehobby, redwolf etc but haven't seen anything different from what I've posted.

Edit:
Looking more closely at my stinger kit, I noticed a thin rubber ring that looks like it'd fit that barrel, is that my hop-up rubber? (before I had just assumed at a quick glance it was a spacer or a rubber washer of some sort) If so, suddenly so many of the mods I've heard mentioned on the rubbers make sense...

Styrak · November 24th, 2010, 06:08

Yes, the rubber ring is the hopup rubber (coulda asked the guy you bought it from

)

Stealthee · November 29th, 2010, 22:57

Anyone have or had a TSC Uni Directional Guide Rod in conjunction with TSC Uni-directional Current-stabilizing Steel Nozzle?

Is it better than RA-TECH's NPAS?

Lorden · December 1st, 2010, 12:49

Can anyone please confirm a reputable shop that has RAG-WE--013 (RA-TECH WE SCAR full Upgrade Kit) in stock?

I've found some Euro shops that have it in stock, but none I've done business with in the past. And of course Redwolf is sold out.

Edit: Nevermind, found a local dealer

Brian McIlmoyle · December 1st, 2010, 13:33

Quote:

Originally Posted by Stealthee

Anyone have or had a TSC Uni Directional Guide Rod in conjunction with TSC Uni-directional Current-stabilizing Steel Nozzle?

Is it better than RA-TECH's NPAS?

NO... they jam.. and have little adjustment latitude.. got one for my SCAR and it sucks

Stealthee · December 3rd, 2010, 01:05

Quote:

Originally Posted by Brian McIlmoyle

NO... they jam.. and have little adjustment latitude.. got one for my SCAR and it sucks

Good to know, thanks Brian.

Qlong · December 10th, 2010, 20:00

Well, I finally got my BADASS from Battle Arms Development, I wanted a more robust safety selector, and these are milled from 12L14 bar stock blocks and not cast. So it turns out that RS safeties do fit with some modding.

Did I mention they are ambidextrous and each lever is swappable for a different configuration?

apparition · December 10th, 2010, 21:08

what are those....things? lol above the trigger, just below the trades in the middle of the receiver?

Daiviet · December 10th, 2010, 21:31

anti rotational pins

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

November 17th, 2010, 00:29	#531
Shrapnel[Op-For] Trader rating Join Date: Sep 2007 Location: Richmond B.C	edit: please delete post. Last edited by Shrapnel[Op-For]; November 17th, 2010 at 00:48..

November 24th, 2010, 01:13	#532
Cushak Trader rating Join Date: Sep 2005 Location: Saskatoon/Moose Jaw	quick question; I recently got a WE GBBR used from a buddy (it's a lower clear M4 version.) I just got in the mail a RA Tech NPAS kit (version 2 for WE M4), stinger hop up kit for we M4 and fire pin base w/ valve locker (as well as a TSC charging handle and a thread adapter.) I also picked up an RA tech hop-up rubber (says for open bolt system/GBBR, but didn't see any rubbers for close bolt - I think mine's a closed bolt) and an RA tech inner barrel. However, the barrel I ordered is set-up differently than the rubbers. Now, normally I would just tear down the gun to install the Stinger kit to see whether I have the right hop-up, or the right barrel and order the other. However, my upcoming week is extremely busy and I don't think I'll have the time for that, but I'd like to order whatever I need to make it work so it's here for when I do have time. Now I'm sorry if this has been answered here or elsewhere (or if this question doesn't belong here), but I've seen nothing mentioned, but if it is a new rubber I need, where would I be able to get one for that barrel? I've look all over, ehobby, redwolf etc but haven't seen anything different from what I've posted. Edit: Looking more closely at my stinger kit, I noticed a thin rubber ring that looks like it'd fit that barrel, is that my hop-up rubber? (before I had just assumed at a quick glance it was a spacer or a rubber washer of some sort) If so, suddenly so many of the mods I've heard mentioned on the rubbers make sense... Last edited by Cushak; November 24th, 2010 at 01:22..

November 24th, 2010, 06:08	#533
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	Yes, the rubber ring is the hopup rubber (coulda asked the guy you bought it from ) __________________ Airsoft Sales and Repair/Upgrade Services

November 12th, 2010, 13:47	#526
Stealthee a.k.a. cloaked Trader rating Join Date: Oct 2008 Location: Scarborough, ON	Alright so I am having the same problem as Ross with the BB jamming. I haven't tried lubing that part yet, but if it still jams when lubed, then I may need to trim the rubber chamber down or get a replacement.

November 17th, 2010, 00:09	#528
Shrapnel[Op-For] Trader rating Join Date: Sep 2007 Location: Richmond B.C	So I feel stupid for asking this.. I disassembled and cleaned my m4, but when I was re-assembling it, I forgot to put the buffer spring back in. I then racked the slide.. and the bolt is now stuck back. I can't get it out, and the gun cannot be opened. Please help me..

November 29th, 2010, 22:57	#534
Stealthee a.k.a. cloaked Trader rating Join Date: Oct 2008 Location: Scarborough, ON	Anyone have or had a TSC Uni Directional Guide Rod in conjunction with TSC Uni-directional Current-stabilizing Steel Nozzle? Is it better than RA-TECH's NPAS?

December 1st, 2010, 12:49	#535
Lorden Trader rating Join Date: Jun 2003 Location: Montreal, QC	Can anyone please confirm a reputable shop that has RAG-WE--013 (RA-TECH WE SCAR full Upgrade Kit) in stock? I've found some Euro shops that have it in stock, but none I've done business with in the past. And of course Redwolf is sold out. Edit: Nevermind, found a local dealer __________________ Custom AK-47, G&P Stubby Killer, Maruzen MP5K, KWA M11A1, WE SCAR-L, WE M92 Marine, Bravo tri-shot spring shottie (full stock), WE M14 EBR Silver Last edited by Lorden; December 1st, 2010 at 16:52..

December 10th, 2010, 20:00	#538
Qlong Division Trader rating Join Date: Jun 2007 Location: Scarborough, Ontario	Well, I finally got my BADASS from Battle Arms Development, I wanted a more robust safety selector, and these are milled from 12L14 bar stock blocks and not cast. So it turns out that RS safeties do fit with some modding. Did I mention they are ambidextrous and each lever is swappable for a different configuration? __________________ Weee! Last edited by Qlong; December 11th, 2010 at 12:15..

December 10th, 2010, 21:08	#539
apparition Trader rating Join Date: May 2009 Location: Calgary	what are those....things? lol above the trigger, just below the trades in the middle of the receiver?

December 10th, 2010, 21:31	#540
Daiviet Captain Sunshine Trader rating Join Date: Aug 2006	anti rotational pins

WETTI/AWSS - M4/SCAR/HK416 - Technical Summary Thread

Upgrades & Modifications