WIP: Upgrading Your Tokyo Marui Glock

[Animalmother]

Guys know where you can get the guarder full tune up kit in stock? I saw the kit for the g17 is it compatible with the g18c? Thanks guys for all your help

[MikeMcNair]

WGC shows in stock..... http://www.wgcshop.com/wgc2008/main/...rom=searchItem

and intruder (i think they always do) http://www.intrudershop.com/show_pro...oduct=1170#top

[Animalmother]

Originally Posted by MikeMcNair

WGC shows in stock..... http://www.wgcshop.com/wgc2008/main/...rom=searchItem

and intruder (i think they always do) http://www.intrudershop.com/show_pro...oduct=1170#top

This can fit the glock 18c right?

[turok_t]

Originally Posted by Animalmother

This can fit the glock 18c right?

The slides are for G17, not G18C as the G18C has a hole for the fire selector. You can however, use the other parts that come with the kit. I would just buy each individual part separately, especially the internals such as hammer, full auto sear, valve knocker, outer barrel, BBU, air nozzle.

[Animalmother]

How often do you guys find yourselves flipping the switch to full auto?

[turok_t]

Originally Posted by Animalmother

How often do you guys find yourselves flipping the switch to full auto?

That really depends on how much full auto you use. For shits and giggles, i like to do a full auto burst with an extended mag. If I was gaming, i would only do semi only.

Detonator makes a G18C slide where the fire selector is not on the side of the slide but beneath the slide itself. You need to rack the slide to expose the bottom of the slide to adjust the full auto/semi switch. Slide looks like this:

http://shop.ehobbyasia.com/media/cat...004_1_mark.jpg

[Danke]

That's what the G18 setup on the new Guns Modify slides is like too.

Tried a couple WiiTech magazine valves today. Dropped in without hassle and seems to drive things reall well. Trying the steel slide later on.

[Animalmother]

How do you know of ylu have the matest version of the marui g18c? I just got my in a shop here oddily.

[turok_t]

Originally Posted by Danke

That's what the G18 setup on the new Guns Modify slides is like too.

Tried a couple WiiTech magazine valves today. Dropped in without hassle and seems to drive things reall well. Trying the steel slide later on.

I wonder if the WE glock CO2 magazines work for Marui glocks. Hmmmmmm

[Danke]

The C02 mags are supposed to be metered to the same punch as a stock one.

Ran the steel slide, would cycle far enough to reset but not to pick up a BB.

Ran the Detonator alloy slide and it rolled fine along with the Guns Modify one.

Air temp 2c, shop temp 8c, mag freshly filled, no chance to warmup. Should work fine in a normal game.

[jjkfeng]

quick question
Has anyone successfully bought a guarder glock frame from an non-Canadian site? Or does anyone know if they are prohibited?

Thanks

[turok_t]

Originally Posted by Danke

The C02 mags are supposed to be metered to the same punch as a stock one.

Ran the steel slide, would cycle far enough to reset but not to pick up a BB.

Ran the Detonator alloy slide and it rolled fine along with the Guns Modify one.

Air temp 2c, shop temp 8c, mag freshly filled, no chance to warmup. Should work fine in a normal game.

Yeah, thats why im not a big fan of guarder steel slides, its so sluggish and can't even clean out another magazine. It might seem "cool" to have a steel slide just like a real glock, but practically, not so efficient for airsoft. Stick with aluminum alloy if you want the best performance.

Originally Posted by jjkfeng

quick question
Has anyone successfully bought a guarder glock frame from an non-Canadian site? Or does anyone know if they are prohibited?

Thanks

They are prohibited to be imported as it is classified as the frame/receiver of the gun. Not only that, but since the glock is the most commonly used by canadian enforcement, CBSA can spot it right away if you try to import it, and it will be confiscated.

[e-luder]

Originally Posted by turok_t

Yeah, thats why im not a big fan of guarder steel slides, its so sluggish and can't even clean out another magazine. It might seem "cool" to have a steel slide just like a real glock, but practically, not so efficient for airsoft. Stick with aluminum alloy if you want the best performance.






They are prohibited to be imported as it is classified as the frame/receiver of the gun. Not only that, but since the glock is the most commonly used by canadian enforcement, CBSA can spot it right away if you try to import it, and it will be confiscated.

Unless....
I get them in

[e-luder]

Originally Posted by turok_t

I wonder if the WE glock CO2 magazines work for Marui glocks. Hmmmmmm

Well, I dunno about the WE CO2 mags but the new APS Action Combat Pistol (A.C.P.) mags work with a Marui Glock. With slight modification of course.

[e-luder]

Originally Posted by Animalmother

How do you know of ylu have the matest version of the marui g18c? I just got my in a shop here oddily.

THe new version have a metal insert on the slide where recoil rod exits the slide.
(I dunno what else to call it).

It was put in place because the plastic slides, in the beginning, were cracking sooo fast that my wife's long ass morning showers would be over before the slide self destructed....

HEEEYYYOOOOO!