WETTI/AWSS - M4/SCAR/HK416 - Technical Summary Thread

[Eeyore]

Have you tried a different mag?

[IRONSIGHT]

What kind of BBs' are you using?

[turok_t]

Yes, I tried both my M4 mags.. no go.. Im using 0.30g bastards. Disassembled and reassembled the hop up unit several times.

[IRONSIGHT]

I'd stick the original barrel back in and start from scratch. The hop up rubber is no where long enough to hold 4 bbs in there, so I would assume there's something wrong with the barrel itself.

[turok_t]

Yeah, im going to try with the stock inner barrel, but I would much prefer to use the RA TECH one... it worked twice before, but failed to work for the other 6 times when assembled/disassembled the hop up

[ebfud]

Originally Posted by Ross

Ratech npas are embarrassingly not compatible with ratech precision inner barrels. Stock gas valves work with ratech inner barrels, and stock inner barrels work with ratech npas. I emailed ratech about this, and they ignored me. you can sand the tip of the ra tech npas and it should fix it.

intresting, im runing both of these parts and before i added the barrel it was fine. any other solutions instead of sanding the nozzle? having a smaller spacer on the npas rod comes to mind so the bolt doesnt push it to far in

[Ross]

Originally Posted by ebfud

intresting, im runing both of these parts and before i added the barrel it was fine. any other solutions instead of sanding the nozzle? having a smaller spacer on the npas rod comes to mind so the bolt doesnt push it to far in

I think the issue is a diameter problem, not length. the tip of the npas needs to be a hair thinner, not shorter.

[turok_t]

Anyone know if this is any good?

http://shop.ehobbyasia.com/falcon-vs...gbb-363mm.html

[ebfud]

if possible im going to change the nozzle and put the npas part into the original nozzle and see if that works

edit: i now have the npas valve in my original nozzle, so far it seems to have worked just dont have any gas left to test will update

[turok_t]

Does anyone know the inner diameter of the RA tech and stock inner barrel? is it 6.01 or 6.03?

EDIT: my gun amazingly works with stock inner barrel, but not with RA tech inner barrel.. also, when i installed a shorter RA tech barrel compared to my longer stock inner barrel, FPS increases by like 30-40fps. So im guessing the RA tech barrel must be uber tight compared to stock

[ACCL]

Anyone found out a solution or some kind of remedy to fix/prevent the back plate from exploding on a WE SCAR? Mine exploded the other day. I'm kind of bummed about that. It's a great GBBR otherwise

[ebfud]

do a quick thread search if you havent already im sure its in here somewhere

[Ross]

Originally Posted by ACCL

Anyone found out a solution or some kind of remedy to fix/prevent the back plate from exploding on a WE SCAR? Mine exploded the other day. I'm kind of bummed about that. It's a great GBBR otherwise

you can add rubber to face of the recoil rod. You can do the pvc mod. Or you can wait until ratech releases the cnc'd part 66 and buy it. If you buy a replacement part 66, chances are it's the reinforced gen 3 part.

[turok_t]

WE Open Bolt M16A1 final test Vid. (Open Bolt kit will be available)

http://www.youtube.com/watch?v=6xXMK...embedded#at=11

[Stealthee]

I just came..