|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
June 12th, 2009, 10:05 | #1 |
Systema Gearbox in JG Navy Mp5?
has anyone put a pre-built systema gearbox in a JG metal Navy Mp5?
i picked up a JG Mp5 SD6 thats stock and works well, and a JG Mp5 RAS (NAVY) that has a non-working gearbox.....my intention is to order a fully assembled gear-box/motor from Red-Wolf airsoft based around either the M150, or M170 spring. i also acquired a CA B&T Full metal SD front end and full stock for the Mp5 Navy as i want to use a 11.1v Lipoly in the gun with the systema box. im just wondering if there will be any fitting problems with this setup? -and before the masses hammer down on me for wanting the M150/170, it WILL not be used for gaming, or shotting at people in any way whatsoever, just hard hitting backyard fun. the ad at redwolf says the Mp5 upgrade is one of the easiest to fit, as all mp5's have their wires to the rear..... other upgrades for the gun, after the mechbox is fitted and working will be a MadBull TB barrel, and if i can find a higher end metal hop-up that will fit this system, i may be putting a longer barre in it as it will have the SD front end, and the "Silencer" will hide the extra length. any thoughts? |
|
June 12th, 2009, 11:33 | #2 |
Not true. But if you have a fullstock MP5, get a rear wired box.
|
|
June 12th, 2009, 11:38 | #3 |
Tys
|
Odd...since pretty much every factory MP5 mechbox I've seen has their wires coming out the rear of the mechbox.
For front wired ones, there's an extension wire that hooks up at the back of the mechbox, goes around the right side of the outside of the mechbox and out through the front. Perhaps that's what the OP meant. |
June 12th, 2009, 20:06 | #4 | |
Quote:
|
||
|
Bookmarks |
|
|