|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
June 25th, 2009, 00:11
|
#1 |
|
What first factory spring should i get for my mb05?
Ok my options are a 150 sp 170 sp and a 210 sp. I need to know what spring i should get because on a forum i was reading that you should get 170 sp spring. This confused me because a 210 is only 8 more dollars. Any information is helpful.
|
|
|
|
|
June 25th, 2009, 00:22
|
#2 |
|
Understand, your looking at a huge velocity and are going to need to do more upgrades to the gun itself to handle a spring like a 210(of which is ridiculous). If you plan to game this gun, don't go over 150, if its targets, a pellet gun may be better for you.
|
|
|
|
|
June 25th, 2009, 02:33
|
#3 |
|
Vicious MSPaint Wizard
|
Leave it as it is, focus on the consistance and reliability of the gun, not the speed. You're probably shooting at about 430-450 already, you don't need to go higher.
In fact, you can't if you want to game the gun. |
|
|
|
|
June 25th, 2009, 02:51
|
#4 |
|
A 150 should be sufficient. Anything over that would destroy the internals in a matter of weeks (especially a 210) if your running on stock parts. Even with a 150, you should consider getting an upgraded sear set and piston.
You won't even be able to game it with anything over a 150 either |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
