Airsoft Part

[FUK.NUT]

Whats The Name For the Part That Holds The Motor Of a AEG (M16) ? i need to replace the piece but i dont know that name .

[L473ncy]

I believe you're referring to the motor cage are you not?

Is it like this thing?

http://www.rookscastle.com/tutorials/motor2.jpg

[Steven]

I believe that would be the Motor Mount.

[Styrak]

Originally Posted by L473ncy

I believe you're referring to the motor cage are you not?

Is it like this thing?

http://www.rookscastle.com/tutorials/motor2.jpg

Originally Posted by Steven

I believe that would be the Motor Mount.

A V2 mechbox doesn't have a motor mount.

FN, did you mean a pistol grip, or motor grip?

[Steven]

Oh, my bad. Disregard my post

[FUK.NUT]

Originally Posted by Styrak

A V2 mechbox doesn't have a motor mount.

FN, did you mean a pistol grip, or motor grip?

I Own a CA M15 A4 ITs /Where the Bottom of the Pistol Grip is the part im missing i need to replace it in order for my Gun to Work


Also Does TM Gears Work With CA ?.

[Styrak]

You mean the motor plate or grip plate.

And yes TM gears will work with CA.

[m102404]

There's 3 things that hold the motor in/to the gun (from the bottom to the top):
1. Grip plate (aka Heatsink)...the metal cap that covers the bottom of the grip, held on by 2 screws. There's a central screw/allen key grub screw in the middle to adjust the motor height...this adjustment screw either pushes directly against the motor's end cap or against a small metal disk (is that what you're missing?).

2. Grip...umm, it's the grip

3. 2-4 screws that hold the grip to the mechbox.

If you're missing the small metal disk...you can cut one out yourself from sheet metal...just match it to the size of the end of the motor cap. Or check airsoftparts.ca...Jugglez usually has some in stock.

Note:...with some grips the adjustment screw is really large and a 3mm ball bearing is used...it's positioned between the adjustment screw and the axle of the motor.
...I've seen plenty of grip caps that have a large adjustment screw...and nothing else inbetween the screw and the motor. Doesn't seem to matter that there isn't a disk/ball bearing present.

[AngelusNex]

How the hell did you manage to lose that? And a warning, few different brands of grips and plates are cross compatible, you'll probably have to find a CA plate or get a whole new grip set.

[FUK.NUT]

Originally Posted by AngelusNex

How the hell did you manage to lose that? And a warning, few different brands of grips and plates are cross compatible, you'll probably have to find a CA plate or get a whole new grip set.

Understood Thanks For Everyones Help

[gunscythe]

Urg. I just had a similar problem. I had a gun that needed a grip end, so I stole it off another gun. So I bought a grip end. The new grip end doesn't come with screws. So I have guns, with lowers, grips, and grip ends, but when I buy the things individually, NONE of them come with screws. So I'm stuck missing screws for numerous pieces.... Grip end has no screws, and the "sniper grip" I bought doesn't come with screws to attach to the gun, nor does it come with a grip end, and even when I buy a grip end there's no screws to attach the grip end to the sniper grip.