m4a1 noob question

[Hoser-eh!]

hey everyone.

iv been looking at some pics of kwa m4a1's and i havnt seen any with forgrips , so can you remove the rail covers to expose top side or bottom rails?
thx

[theguy]

If it has a rail system, then yes.

the standard M4 plastic hand guards do not have rails on them. You can buy small rails to attach to the standard plastic hand guards, but most people who want rails on the front end just go for a rail system.

[Deadpool]

That's not a rail cover, It's a hand guard. You need to change the handguard to an R.A.S. hand guard to have rails.

[chadlh]

If you purchase the KWA M4 S-System you will already have the rail system
http://albertaairsoft.com/store/prod...id_product=178

[GSK88]

If you JUST want bottom or top rails, there's ones that use screws to attach through the holes in the regular grips. If you want side rails, like theguy mentioned you'd need an RIS/RAS handguard.

Keep in mind you really don't get a lot of real estate with the small add-on rails. I had a regular carry handle with an EOtech 551 on the forward top handguard and that was about all I could fit.

[Hoser-eh!]

Originally Posted by chadlh

If you purchase the KWA M4 S-System you will already have the rail system
http://albertaairsoft.com/store/prod...id_product=178

but it costs like 75 bucks more on that site. you could just get a front rail system like "theguy" said for 35 on the same site and its the same gun internally

[baker_Jeff]

Actually the "S-System" models come with the rail system ($65-$75 value), front and rear flip up sights ($32 -$45) value.

Jeff

[Hoser-eh!]

i didnt realize that the S-System had flip up sights thx baker_Jeff

[Tex]

Also the s system gives you one full length top rail making the front end super solid. Now I'm not saying you can't build an ar with that after market but it is nice to have out of the box.