Mp5 Tight Bore

shiftline · March 23rd, 2010, 12:53

Awesome, thank you

last question! (i hope) any big differance from 300mm vs 363mm on a stock tm mp5 cylinder?

CDN_Stalker · March 23rd, 2010, 13:33

Quote:

Originally Posted by shiftline

Awesome, thank you

last question! (i hope) any big differance from 300mm vs 363mm on a stock tm mp5 cylinder?

My velocity in my MP5SD went from 367fps to 387fps by adding an extra 100mm of inner barrel, so you do the math.

Likely you won't see much of an increase in accuracy, nor in extra range. The hop up rubber change and heavier ammo will give you a noticable improvment though.

shiftline · March 23rd, 2010, 13:45

haha well you are in the middle of the 2!

so 363mm it is

along is the clear hop-up > this one or the Black one The clear says for guns under 400fps. no idea what mine is.. TM with 17%pdi and prob a 363mm tight bore soon

and might have to order some .28's soon you guys are expensive! lol

I was reading about sorbo pads. are they worth adding to "quiet" the gun.. would you loose velocity bt adding it on to the piston head?

CDN_Stalker · March 23rd, 2010, 13:50

You shouldn't. What motor do you have in it? You can make it quieter by going with an EG700 if you have an EG1000 in it right now. Likely yours is a stock TM so it should already have the 700 in it. Add the Sorbo pad and it should be pretty good for quiet, a bit more if you have a suppressor a bit longer than your inner barrel.

shiftline · March 23rd, 2010, 13:55

I believe its the EG700 Pro/special or something along those lines.. so ill add in some sorbo's

For hop up rubbers which is recommended

Guarder clear
Guarder black improved
systema energy

also would a mp5/m4 both use the same one? (might redo both guns)

shiftline · March 24th, 2010, 00:40

Any opinions on hop-up rubbers?

CDN_Stalker · March 24th, 2010, 08:53

I still prefer the clear, have it in all my guns currently, and have used them for years. Have tried out a few other types also, RH65, Guarder black, Madbull rubber ones (they suck due to leakage), and I still went back to the Guarder clear.

shiftline · March 24th, 2010, 12:31

Works for me, so they are the same for all guns, mp5 and m4?

shiftline · March 24th, 2010, 12:49

We will just hope its a yes.. now i just have to wait for the packages to arrive!
thanks for your help guys.

CDN_Stalker · March 24th, 2010, 14:38

Quote:

Originally Posted by shiftline

Works for me, so they are the same for all guns, mp5 and m4?

Yes, same for all AEGs.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

March 23rd, 2010, 12:53	#31
shiftline Trader rating Join Date: Sep 2004	Awesome, thank you last question! (i hope) any big differance from 300mm vs 363mm on a stock tm mp5 cylinder? __________________ Optical Illusions

March 23rd, 2010, 13:45	#33
shiftline Trader rating Join Date: Sep 2004	haha well you are in the middle of the 2! so 363mm it is along is the clear hop-up > this one or the Black one The clear says for guns under 400fps. no idea what mine is.. TM with 17%pdi and prob a 363mm tight bore soon and might have to order some .28's soon you guys are expensive! lol I was reading about sorbo pads. are they worth adding to "quiet" the gun.. would you loose velocity bt adding it on to the piston head? __________________ Optical Illusions Last edited by shiftline; March 23rd, 2010 at 13:49..

March 23rd, 2010, 13:50	#34
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	You shouldn't. What motor do you have in it? You can make it quieter by going with an EG700 if you have an EG1000 in it right now. Likely yours is a stock TM so it should already have the 700 in it. Add the Sorbo pad and it should be pretty good for quiet, a bit more if you have a suppressor a bit longer than your inner barrel. __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

March 23rd, 2010, 13:55	#35
shiftline Trader rating Join Date: Sep 2004	I believe its the EG700 Pro/special or something along those lines.. so ill add in some sorbo's For hop up rubbers which is recommended Guarder clear Guarder black improved systema energy also would a mp5/m4 both use the same one? (might redo both guns) __________________ Optical Illusions Last edited by shiftline; March 23rd, 2010 at 14:50..

March 24th, 2010, 00:40	#36
shiftline Trader rating Join Date: Sep 2004	Any opinions on hop-up rubbers? __________________ Optical Illusions

March 24th, 2010, 08:53	#37
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	I still prefer the clear, have it in all my guns currently, and have used them for years. Have tried out a few other types also, RH65, Guarder black, Madbull rubber ones (they suck due to leakage), and I still went back to the Guarder clear. __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

March 24th, 2010, 12:31	#38
shiftline Trader rating Join Date: Sep 2004	Works for me, so they are the same for all guns, mp5 and m4? __________________ Optical Illusions

March 24th, 2010, 12:49	#39
shiftline Trader rating Join Date: Sep 2004	We will just hope its a yes.. now i just have to wait for the packages to arrive! thanks for your help guys. __________________ Optical Illusions

Mp5 Tight Bore

Upgrades & Modifications