ICS V2 "breakdown" mechbox

[iggim109]

hi i was wondering that if ICS's mechbox would fit on Magpul Style Metal Body or MUR Style Upper Receiver
can anyone help me out here???
thanks

[Affliction]

Nope.

ICS Mechboxes are only compatible with ICS bodies.

Unlike regular mechboxes, it consists of an upper and lower.

[HKGhost]

ICS use proprietary body and does not work with TM compatible body. I've seen some people use TM compatible bodies on their ICS, but there is a lot of work to be done for it to work.

[iggim109]

Originally Posted by HKGhost

ICS use proprietary body and does not work with TM compatible body. I've seen some people use TM compatible bodies on their ICS, but there is a lot of work to be done for it to work.

well thing is i'm looking to get this

magpuBodyTan.jpg
http://airsoftdepot.ca/catalog/produ...roducts_id=230

will there be still problems???

[Styrak]

Originally Posted by iggim109

well thing is i'm looking to get this

Attachment 17584
http://airsoftdepot.ca/catalog/produ...roducts_id=230

will there be still problems???

Since you didn't read it the first time, here you go

Originally Posted by Affliction

Nope.

ICS Mechboxes are only compatible with ICS bodies.

[HKGhost]

Like mention before. Short answer is No. That won't work with an ICS mechbox. If you really want that body to fit an ICS mechbox, you'll have to spend a lot of time modding the shit out of it for it to work. And if you screw up, well you just wasted $200+.

Originally Posted by iggim109

well thing is i'm looking to get this

Attachment 17584
http://airsoftdepot.ca/catalog/produ...roducts_id=230

will there be still problems???

[Kos-Mos]

Originally Posted by HKGhost

Like mention before. Short answer is No. That won't work with an ICS mechbox. If you really want that body to fit an ICS mechbox, you'll have to spend a lot of time modding the shit out of it for it to work. And if you screw up, well you just wasted $200+.

No, you just can't.

The ICS receivers are made longer than the TM based ones... to keep scale closer to the real thing. You would need to make a custom receiver out of a block a aluminum to make it fit. While not impossible, defenitely not cheap.

[voorhees -FWA-]

Metal ICS bodies come lightly engraved with Olympic Arms trades; djbordie does custom engraving on these boards. If you have your heart set on a Magpul body, get an ICS lower, sand it of any trades and contact him. Paint her up and you'll have the only Magpul ICS M4 that I know of...

[voorhees -FWA-]

Djbordie http://www.airsoftcanada.com/member.php?userid=23172

[iggim109]

Originally Posted by Kos-Mos

No, you just can't.

The ICS receivers are made longer than the TM based ones... to keep scale closer to the real thing. You would need to make a custom receiver out of a block a aluminum to make it fit. While not impossible, defenitely not cheap.

is that right eh????
oh man i just wanted something like PTW but little cheaper then Systema. after that make a custom m4 with mixture of CASV in frount and Magpul in body& stock.

Something like this:

myweapon(2).jpg

[Affliction]

Originally Posted by iggim109

is that right eh????
oh man i just wanted something like PTW but little cheaper then Systema. after that make a custom m4 with mixture of CASV in frount and Magpul in body& stock.

Something like this:

Attachment 17586

Why would you want a PTW?

If you want realism -- Go for the popular WE GBBRs -- will run you between $450-$650 (plastic/metal receiver). There is a Magpul CNC Aluminum receiver available as well (expensive, however).

If you want reliability -- Go for any G&P M4/M16 variant. Magpul receivers also available.

[HKGhost]

There was a member that has an ICS with a D-boys receiver. I wonder how that was done.

Originally Posted by Kos-Mos

No, you just can't.

The ICS receivers are made longer than the TM based ones... to keep scale closer to the real thing. You would need to make a custom receiver out of a block a aluminum to make it fit. While not impossible, defenitely not cheap.