GHK Gbb AK74 Magazine Missing seal ?

[Pre-1898]

I have just received my brand new GHK Co2 magazine for my AK74, and as soon I hace screwed in the cap the Co2 leaks from the screw cap.

I looked inside and there is NO puncture pin seal Since the screw cap as no seal and as a hole in it, I assume there shall be a puncture pin seal to keep it sealed.

I lookded inside the package in case the seal was loose somewhere. No seal found !

Can anyone tell me how the hell that thig is supposed to seal if there is No puncture pin seal nor sealed Co2 cartridge chamber cap ? Part must be missing somewhere !!

[Dart]

those seals like to fall out of Co2 Mags. They are clear rubber and near impossible to see after you misplace them. Go to a Paintball shop thats near buy and get them to put a new one in. They usually have a ton of orings.

should only cost a few bucks plus the co2 cap to test it.

btw never "swing" your mags to get the cap out... really good way to lose a seal. trust me.

[Pre-1898]

Originally Posted by Dart

those seals like to fall out of Co2 Mags. They are clear rubber and near impossible to see after you misplace them. Go to a Paintball shop thats near buy and get them to put a new one in. They usually have a ton of orings.

should only cost a few bucks plus the co2 cap to test it.

btw never "swing" your mags to get the cap out... really good way to lose a seal. trust me.

Thanks for your tip Dart !