M4 Metal Body

[MegaFacepalm]

Will this fit a G&G M4? (GR16 Series, if that info means anything)

If not, is there a different metal body you'd recommend?

[R.I.T.Z]

yes, however you cannot import it.
its a restricted item

[MegaFacepalm]

Thanks for the help.

[cjboi]

it wont work... I dont know why RITZ is telling you it will, but it wont

[R.I.T.Z]

Originally Posted by cjboi

it wont work... I dont know why RITZ is telling you it will, but it wont

and why wont it work?
the agm metal bodies to my knowledge are compatible with G&G's
the gearbox and internal dimensions are the same are they not?

[Crunchmeister]

Depends on whether the G&G has blowback or not, I would guess.

[R.I.T.Z]

Originally Posted by Crunchmeister

Depends on whether the G&G has blowback or not, I would guess.

this is true blowbacks a bitch, i'm assuming its the GR16 off buycrap.ca
which means its quite possible...

[cjboi]

The new G&G's are blowback's, but it doesn't matter if the gun is blowback or not because the lower receiver is very picky in which lower receiver fits better. You really cant fit any receiver on a G&G unless its a G&G receiver itself and the receiver is very hard to find and expensive than most receivers out there. You would have more chance of finding or fitting an after market receiver for a G&G mp5 than G&G M4/M16 or AK's. G&G aren't TM compatible externally (receiver), more like internally TM compatible...

[MegaFacepalm]

No, the M4 I own isn't Blowback.

Probably should have provided that info. My bad.

Didn't get it from buyairsoft.ca either. I've heard bad things about that place.

[R.I.T.Z]

Originally Posted by cjboi

The new G&G's are blowback's, but it doesn't matter if the gun is blowback or not because the lower receiver is very picky in which lower receiver fits better. You really cant fit any receiver on a G&G unless its a G&G receiver itself and the receiver is very hard to find and expensive than most receivers out there. You would have more chance of finding or fitting an after market receiver for a G&G mp5 than G&G M4/M16 or AK's. G&G aren't TM compatible externally (receiver), more like internally TM compatible...

i had a king arms metal body on my G&G M4 CQB-R and it fit fine, no wobbles or fitment issues,

[cjboi]

Originally Posted by R.I.T.Z

i had a king arms metal body on my G&G M4 CQB-R and it fit fine, no wobbles or fitment issues,

did both top and bottom receivers fit well? I tried before and the top one didn't fit well. Only the lower part of the receiver.

[R.I.T.Z]

Originally Posted by cjboi

did both top and bottom receivers fit well? I tried before and the top one didn't fit well. Only the lower part of the receiver.

both where fine

[Eeyore]

Originally Posted by cjboi

did both top and bottom receivers fit well? I tried before and the top one didn't fit well. Only the lower part of the receiver.

I as well have a G&G M4 that I put a clone receiver on. It fit fine, no problems at all.

[cjboi]

really??? that's weird. I had to use the top receiver for the delta ring to work.

I wished I didn't sell my G&G m4, so I could try to put other receiver and see for myself.

I always thought G&G m4/m16 receiver we're only compatible with other brands if you only use the bottom.