|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
October 11th, 2010, 20:46 | #1 |
upgrading G&G CQBR MAX
Hey guys and gals, just bought my first AEG and now I am looking at upgrading some internals. I have to open it up anyways to but a smaller, M120 spring in it and was wondering if I should look at new air nozzles, tappit plate, cylinder assembly, and other things. Not sure if they mount to anything but a smaller check book. My question is, for this gun that has great bearings and gears, is there anything else I should consider to upgrade while I have it apart?
__________________
Chris Task Force Delta Canada Redline N7 Milsim M4 FCC Systema PTW TM G17 |
|
October 11th, 2010, 21:18 | #2 |
A Total Bastard
|
Less is more... That is all.
Do your spring swap, make sure its shimmed right, decent tapet plate and piston in there for reliability, metal bushings, nozel with oring, and cylinder matches the barrel you have.
__________________
W1-5 Last edited by Renegade); October 11th, 2010 at 21:27.. |
October 11th, 2010, 21:25 | #3 |
I'd lower it down to a M110 Spring because with a tighbore added (assuming your going to add one) you'll be averagin around 380fps, which is where you want.
Also im not too sure about the internals, whether of not the piston head still sucks, so I'd upgrade that too. Oh, and get a tightbore. List: Spring- http://www.airsoftparts.ca/store2/in...roducts_id=573 Piston Head- http://www.airsoftparts.ca/store2/in...roducts_id=779 Barrel- http://shop.ehobbyasia.com/prometheu...1a1-300mm.html
__________________
|
|
October 11th, 2010, 21:29 | #4 |
Administrator
|
It comes with an M100 spring in the box. That should lower the fps to the 350-360 fps range.
__________________
ASC Age Verifier for Red Deer & Area Alberta |
|
Bookmarks |
|
|