|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
February 26th, 2011, 18:48
|
#1 |
|
KJW c02 mag leaking from top
I had a small leak in one of my mags so i took out the fill valve and went to oil it. One of the o rings has broke and now the air doesn't hold in the mag, but shoots out the top.Also the Fill valve seems stuck (the head doesn't move back and forth) Is there anyway to fix this?
__________________
 |
|
|
|
February 26th, 2011, 18:58
|
#2 | |
|
Suburban Gun Runner
|
You can buy fill valves or find an oring that fits.
__________________
Quote:
|
|
|
|
|
|
February 26th, 2011, 19:05
|
#3 |
|
|
I didn't see any on airsoftparts, any ideas where i can get one?
Thanks again.
__________________
|
|
|
|
|
March 1st, 2011, 13:22
|
#4 |
|
What type of mag is this?
I have a theory the missing Oring is jammed into the valve...
__________________
Airsoft Armory Joe Burton President/C.E.O Avid Headhunter "Call me Sandman, I'll put em all to sleep." |
|
|
|
|
March 1st, 2011, 13:35
|
#5 |
|
|
It was jammed in the valve. At first i didn't see it, but when i pulled the valve out the o-ring was torn up.
__________________
|
|
|
|
|
March 1st, 2011, 15:34
|
#6 |
|
|
You should be able to get a replacement at any Canadian Tire or Home Hardeware, etc. Hope you get it working properly again.
 If not feel free to msg me, I'm pretty good with GBBs
__________________
Airsoft Armory Joe Burton President/C.E.O Avid Headhunter "Call me Sandman, I'll put em all to sleep." |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
