KWA Glock 18c (slide DOESN'T click in)

[Henry Wisdom]

Case closed! =p

[audi_bhoy]

I don't seem to understand what you are asking for, you are trying to rack the slide in after field stripping? If so, make sure the fire selector is in neutral, not in semi and not in full.

[AngelusNex]

make sure the barrel and spring guide are both in the proper positions when sliding the slide back on. I have a similar issue with my KSC G18 which is usually just the barrel about 1/2 mm too low in the chamber area then it should be.

[Henry Wisdom]

Originally Posted by audi_bhoy

I don't seem to understand what you are asking for, you are trying to rack the slide in after field stripping? If so, make sure the fire selector is in neutral, not in semi and not in full.

Yeah I had the selector switch between the two when I tried to rack the slide back.

Here's a video I made that explains the problem better. Do you see anything wrong with any of the parts or anything I am doing? I think the spring looks a tad bent?

YouTube - ‪KWA Glock 18c fixing slide problem‬‏

[Henry Wisdom]

Yeah I tried that, still no luck. )=

Here's a video that explains the problem a bit better.

YouTube - ‪KWA Glock 18c fixing slide problem‬‏

So you see anything wrong that I am doing when trying to reassemble it? Or anything wrong with the parts? I think the spring looks a bit wonky?

[audi_bhoy]

As I've seen on the video it seems to stuck on the mechbox part, I had no sound but that seems to be around that area. Make sure the part inside the slide that the selector moves up and down isn't getting in the way.

[Henry Wisdom]

Problem solved! Thank you very much for the help! (=

[audi_bhoy]

So, what was it?