KWA G26c Replacement part

Riceboy43 · August 7th, 2011, 18:40

Well my KWA G26 is only shooting semi and won't shoot Full Auto and Airsoft Extreme told me that a piece is bent so it can't shoot full auto and they said I could replace it

which piece number do I need to replace so it could shoot full auto?
Below is a diagram of the gun

http://www.kwausa.com/forums/index.php?showtopic=25
Remove message

MultipleParadox · August 7th, 2011, 19:39

These "Airsoft Extreme" guys couln't tell you *which* piece actually bent?
Sounds like it would have been much much easier that way no?

Or maybe am I missing something? O_o

Riceboy43 · August 7th, 2011, 23:16

Quote:

Originally Posted by MultipleParadox

These "Airsoft Extreme" guys couln't tell you *which* piece actually bent?
Sounds like it would have been much much easier that way no?

Or maybe am I missing something? O_o

They did tell me but I forgot cuz i was planning on replacing the part but I was to busy last week and I don't wanna drive back there again live kinda far away from them

Amos · August 8th, 2011, 01:05

Call them?

Riceboy43 · August 8th, 2011, 06:27

cmon guys can you help me or not

slink182 · August 8th, 2011, 07:44

Quote:

Originally Posted by Riceboy43

cmon guys can you help me or not

No, we can't help you because WE DON'T KNOW WHAT'S BENT, and all you're giving us is AN EXPLODED DIAGRAM.

We are not mind readers.

Here's an idea - take a picture of you're bent part in the gun and post it up. At the very minimum, it'll give us a point of reference.

Also, use some punctuation in your run-on sentences. You won't look so much like a blithering mouth-breather then.

mmmken · August 8th, 2011, 08:03

I told you not to buy a broken gun if you did not have any knowledge of how the gun works at all. You're not only cheap to buy a broken gun, but you're also too lazy to just go ask "Airsoft Extreme" about the specific part to be replaced?

I have a feeling that they never told you which part because you were too cheap to pay them to fix it. I also have a feeling that if someone told you here, you'd be back next week with a thread asking us how you would go about replacing it in detail.

I think you're on your own here, buddy.

Riceboy43 · August 8th, 2011, 15:41

Never Mind I fixed it myself last night!!!!

mmmken · August 8th, 2011, 18:16

Quote:

Originally Posted by Riceboy43

Never Mind I fixed it myself last night!!!!

Good for you.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

August 7th, 2011, 18:40	#1
Riceboy43 Trader rating Join Date: Jun 2011 Location: California	KWA G26c Replacement part Well my KWA G26 is only shooting semi and won't shoot Full Auto and Airsoft Extreme told me that a piece is bent so it can't shoot full auto and they said I could replace it which piece number do I need to replace so it could shoot full auto? Below is a diagram of the gun http://www.kwausa.com/forums/index.php?showtopic=25 Remove message

August 8th, 2011, 01:05	#4
Amos Trader rating Join Date: Aug 2006 Location: Japan	Call them? __________________ Custom Builds: FA3674U Krinkov G3SD6

August 8th, 2011, 08:03	#7
mmmken Trader rating Join Date: Aug 2008 Location: Markham, Ontario	I told you not to buy a broken gun if you did not have any knowledge of how the gun works at all. You're not only cheap to buy a broken gun, but you're also too lazy to just go ask "Airsoft Extreme" about the specific part to be replaced? I have a feeling that they never told you which part because you were too cheap to pay them to fix it. I also have a feeling that if someone told you here, you'd be back next week with a thread asking us how you would go about replacing it in detail. I think you're on your own here, buddy. __________________ Age Verifier - Unionville and Markham.

August 8th, 2011, 06:27	#5
Riceboy43 Trader rating Join Date: Jun 2011 Location: California	cmon guys can you help me or not

August 8th, 2011, 15:41	#8
Riceboy43 Trader rating Join Date: Jun 2011 Location: California	Never Mind I fixed it myself last night!!!!

KWA G26c Replacement part

Upgrades & Modifications