|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
November 1st, 2011, 15:02
|
#1 |
|
KSC Glock 17 hopup metal ball.....
Does anybody know where do find a replacement?
Or anybody know the exact size of it? (in mm) I need a help here, thanks. |
|
|
|
|
November 1st, 2011, 15:09
|
#2 |
|
I lost mine way back and was never able to find a replacement. Every place I did see it online was listed as out of stock.
However, I did make my own with a small solder bead, and the gun works flawlessly. It's my most accurate pistol despite that.
__________________
|
|
|
|
|
November 1st, 2011, 15:23
|
#3 |
|
a solder bead?? could you measure yours? because I've tried to make my own solder bead too but they were just too big or small...I think I've made about at least 15 of them tried...
|
|
|
|
|
|
November 1st, 2011, 16:02
|
#4 | |
|
Lost mine as well, KWA M93RII
Surprisingly it does shoot straight enough without it You can probably order one from KWA USA's proshop though I didn't want to get into the hassle of calling and all; it's the only real reason I haven't ordered one yet; last time I checked it was in stock (along with hopup rubber)
__________________
Quote:
|
|
|
|
|
|
November 1st, 2011, 16:13
|
#5 |
|
|
I have no way of measuring that dude. I say just experiment until you get one the right size. I had 3 tries at it before I found one on my iron cleaning sponge that happened to work perfectly.
__________________
|
|
|
|
|
November 1st, 2011, 22:25
|
#6 |
|
What a hassle it is.....I guess I'll have to start making solder beads again...
|
|
|
|
|
|
November 1st, 2011, 23:43
|
#7 |
|
|
Melt solder on your iron then drag it on a wet sponge. You'll get beads of different sizes.
__________________
|
|
|
|
|
November 2nd, 2011, 00:12
|
#8 |
|
Weird bit of trivia. One of the older IKEA dressers (from a couple of years ago) had bearings in the roller arms that are the exact, same size BBs as the one that KSC uses for their hopup BB.
If you drop by your local IKEA in the service/parts department you might be able to find a set of those slider/roller arms with the BBs if you take it apart for about $5/set or so iirc. |
|
|
|
|
November 2nd, 2011, 10:36
|
#9 | |
|
You can also go to a hobby shop and buy a AE RC18 ball differential rebuild kit... they are about 2$ and come with 8 BBs
__________________
Quote:
|
|
|
|
|
|
November 2nd, 2011, 11:30
|
#10 | |
|
Quote:
|
||
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
