KWA M11A1 firing problem (no gas)

the_hellspawn · June 20th, 2012, 13:37

Hello fellow airsofters,

I currently have an issue with my new toy and any help would be appreciated. It seems that the "valve knocker" is not aligned properly because everytime I hit the trigger, no gas is released so I took apart my M11A1 to see what's wrong... For those who have the part diagram, the part 16 (impact block) is loose and the part 75 (impact block spring) don't seem to be attach to anything. The thing is that I don't know if it's normal or not. I've found no pictures/vids clear enough to see how it should be installed.

Can you help me?

Here's a pic I've found so you know what I'm talking about:

Thanks guys

HS

p.phresh · June 20th, 2012, 17:43

is the bolt cracked? That is the most common problem with M11 during use over time.

the_hellspawn · June 20th, 2012, 18:27

A cracked bolt could prevent the hammer to hit the release valve? I'll check that when I get back home.

Thanks

the_hellspawn · June 20th, 2012, 22:06

Nevermind guys, I've managed to make it work. FYI the problem was really with the spring, one leg needs to be under the part 16 (little cylinder in the side) and the other one below the cylinder of part 65.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

June 20th, 2012, 13:37	#1
the_hellspawn Trader rating Join Date: Jun 2009 Location: Rimouski, Qc	KWA M11A1 firing problem (no gas) Hello fellow airsofters, I currently have an issue with my new toy and any help would be appreciated. It seems that the "valve knocker" is not aligned properly because everytime I hit the trigger, no gas is released so I took apart my M11A1 to see what's wrong... For those who have the part diagram, the part 16 (impact block) is loose and the part 75 (impact block spring) don't seem to be attach to anything. The thing is that I don't know if it's normal or not. I've found no pictures/vids clear enough to see how it should be installed. Can you help me? Here's a pic I've found so you know what I'm talking about: Thanks guys HS __________________ Airsoft guns: ICS M4 R.I.S.,TM VSR-10 Pro, CA P90, HFC M9, KWA M11A1 Last edited by the_hellspawn; June 20th, 2012 at 13:39..

June 20th, 2012, 18:27	#3
the_hellspawn Trader rating Join Date: Jun 2009 Location: Rimouski, Qc	A cracked bolt could prevent the hammer to hit the release valve? I'll check that when I get back home. Thanks __________________ Airsoft guns: ICS M4 R.I.S.,TM VSR-10 Pro, CA P90, HFC M9, KWA M11A1 Last edited by the_hellspawn; June 20th, 2012 at 18:30..

June 20th, 2012, 22:06	#4
the_hellspawn Trader rating Join Date: Jun 2009 Location: Rimouski, Qc	Nevermind guys, I've managed to make it work. FYI the problem was really with the spring, one leg needs to be under the part 16 (little cylinder in the side) and the other one below the cylinder of part 65. __________________ Airsoft guns: ICS M4 R.I.S.,TM VSR-10 Pro, CA P90, HFC M9, KWA M11A1

June 20th, 2012, 17:43	#2
p.phresh Trader rating Join Date: Sep 2004 Location: Winnipeg, MB	is the bolt cracked? That is the most common problem with M11 during use over time.

KWA M11A1 firing problem (no gas)

Doctor's Corner