TM Hicapa - BBs Roll out

Eddie · July 10th, 2005, 03:17

OK I have a TM Hicapa which I just finished upgrading and it seems its firing fine but the bbs are either not coming out or rolling out on the next shot.

TM Hicapa Upgraded With:
-PGC Metal Slide
-KM Tightbore
-PGC Loading Muzzle
-Shooters Design Metal Piston Head Set
-Guarder Recoil and Hammer Spring
-Nineball Slim Safety
-Nineball Slim Mag Release
-Nineball Mainspring Housing

The Kick is strong but the fps is non-existint. I also have 2 Guarder High Performece valves but no way to install them with out a valve key.

Mr.Xpendable · July 10th, 2005, 18:16

when you installed the PGC Loading Muzzle, did you take the internal parts out of the original and put then in the new loading muzzle ? parts H51-21 to H51-23

Eddie · July 10th, 2005, 20:17

Yeah I did. Was I not spost to?

Mr.Xpendable · July 11th, 2005, 00:23

yes your spost to, just sounded like that would have been the problem. but if it were my hi-capa that is what i'd be looking at. I'd also make sure part h51-22 is moving freely and isn't stuck.

Mysteryfish · July 11th, 2005, 07:53

i had roll-outs and weird problems like that once my hicapa was upgraded too..

It's weird. Nothing's really different, but it keeps happening.

I think it might be the extra weight of the slide and the extra speed of the recoil spring slamming forward that just shove the BB's a little too far/too hard sometimes.

Eddie · July 11th, 2005, 13:20

Well after disassembling the hicapa I found that part H51-22 is getting stuck forward. Its probley due to the PGC's loading muzzles inner diameter is to tight. I get 1 good shot off then the part 22 gets jammed forward.

ILLusion · July 11th, 2005, 20:53

The PGC nozzle is (strangely) not compatible with PGC metal slides. It works fine in my Shooter's Design slide though... just not with my PGC slide. Odd. I would say it's the slide's fault.

Mantelope · July 11th, 2005, 20:54

I'd say it's PGC's fault.

Eddie · July 12th, 2005, 00:58

Id say its TMs fault for not making it full metal. side note I intalled a new piston head for my p226 and its now got the same problem. Looks like the new piston head is giving more resistence on the loading muzzle then the stock one.

I switched back the the loading muzzle on the hicapa to the stock one its got some shots back but the bbs are randomly getting stuck in the barrel.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

July 10th, 2005, 03:17	#1
Eddie Trader rating Join Date: Jun 2003 Location: Surrey, BC	TM Hicapa - BBs Roll out OK I have a TM Hicapa which I just finished upgrading and it seems its firing fine but the bbs are either not coming out or rolling out on the next shot. TM Hicapa Upgraded With: -PGC Metal Slide -KM Tightbore -PGC Loading Muzzle -Shooters Design Metal Piston Head Set -Guarder Recoil and Hammer Spring -Nineball Slim Safety -Nineball Slim Mag Release -Nineball Mainspring Housing The Kick is strong but the fps is non-existint. I also have 2 Guarder High Performece valves but no way to install them with out a valve key.

July 11th, 2005, 20:53	#7
ILLusion GBB Whisperer Trader rating Join Date: Jun 2002 Location: Toronto	The PGC nozzle is (strangely) not compatible with PGC metal slides. It works fine in my Shooter's Design slide though... just not with my PGC slide. Odd. I would say it's the slide's fault. __________________ *Advanced Airsoft Armaments and Enhancements* Quick to the gun, sure of your grip. Quick to the threat, sure of your shot. Diligentia, Vis, Celeritas Accuracy, Power, Speed

July 11th, 2005, 20:54	#8
Mantelope Scotty aka harleyb Trader rating Join Date: Mar 2004 Location: Toronto, Ontario	I'd say it's PGC's fault. __________________

July 10th, 2005, 18:16	#2
Mr.Xpendable Trader rating Join Date: Oct 2002 Location: Kelowna	when you installed the PGC Loading Muzzle, did you take the internal parts out of the original and put then in the new loading muzzle ? parts H51-21 to H51-23

July 10th, 2005, 20:17	#3
Eddie Trader rating Join Date: Jun 2003 Location: Surrey, BC	Yeah I did. Was I not spost to?

July 11th, 2005, 00:23	#4
Mr.Xpendable Trader rating Join Date: Oct 2002 Location: Kelowna	yes your spost to, just sounded like that would have been the problem. but if it were my hi-capa that is what i'd be looking at. I'd also make sure part h51-22 is moving freely and isn't stuck.

July 11th, 2005, 07:53	#5
Mysteryfish Trader rating Join Date: Mar 2004 Location: North Vancouver, B.C.	i had roll-outs and weird problems like that once my hicapa was upgraded too.. It's weird. Nothing's really different, but it keeps happening. I think it might be the extra weight of the slide and the extra speed of the recoil spring slamming forward that just shove the BB's a little too far/too hard sometimes.

July 11th, 2005, 13:20	#6
Eddie Trader rating Join Date: Jun 2003 Location: Surrey, BC	Well after disassembling the hicapa I found that part H51-22 is getting stuck forward. Its probley due to the PGC's loading muzzles inner diameter is to tight. I get 1 good shot off then the part 22 gets jammed forward.

July 12th, 2005, 00:58	#9
Eddie Trader rating Join Date: Jun 2003 Location: Surrey, BC	Id say its TMs fault for not making it full metal. side note I intalled a new piston head for my p226 and its now got the same problem. Looks like the new piston head is giving more resistence on the loading muzzle then the stock one. I switched back the the loading muzzle on the hicapa to the stock one its got some shots back but the bbs are randomly getting stuck in the barrel.

TM Hicapa - BBs Roll out

Doctor's Corner