Is it a good idea to use the polyswitch resettable fuse to replace the glass fuse in AEGs?

[ccyg8774]

Originally Posted by Cobrajr122

That is odd as properly hooking up a DMM to measure current adds nearly 0 load to a circuit. If you have access to another DMM I would check the resistance of the first one, might be junk.

Just checked the resistance of my DMM with a university DMM, the resistance is less than 2 ohm (in the correct setting). I guess the problem was on the connection between the DMM to the gun circuit then.

But for the fuse, I guess 14A will be enough, as I will use the polyfuse to replace the glass fuse that is only 10-15A.