HELP! G&G MP5 weird trigger problem

[Agent M]

I have that G&G MP5, not even a year old, been gamed maybe 4 times. When fired on full auto, after 5-10 shots it stops shooting and I must press again on the trigger. Apparently it happens only when I push the trigger all the way down.

I never had this problem before with any of my guns. Kinda weird...

So if you know what to do or have a solid explanation feel free to message me!

THANKS!

[Agent M]

Anything you know might help!

[FULLMETAL]

Why do you want to shot more than 5 shots at the same time???!! Is an MP5 not an M249...

Anyway it can be a lot of different things, the tappet plate, wiring, overheating...

[Styrak]

Sounds like the trigger block is slipping over the trigger, that's why you have to reset. Slowly reset/release the trigger and listen for a click. If there's a click, that's the trigger block resetting on the trigger.

Could also be a cutoff lever issue.

[ccyg8774]

trigger contact?

[SuperCriollo]

Something similar happened to my M4, The trigger post in the gearbox shell may have broken.

[audi_bhoy]

Most likely it's doing as Styrak said, the trigger sliding contact jumps over the trigger just like the cut-off lever would do in semi. I've had people coming in for this issue, most of the times I was able to just bend the slider's spring so it pushes more on the trigger itself.

[Agent M]

thanks to everyone!

updates and clarification on problem;
-wire's not overheating
-trigger post not broken or bent
-trigger contact normal
-cutoff lever is fine

yes the trigger can make that ''click noise when pulled all the way down, didnt noticed it before.

I'll try what you said audi_bhoy

will update this post later with results