TM glock 18c-21 part ?

[viking9934]

hi

i just inspected a recently bought tm glock 18c and i've found thaht the part 18c-21 is not the OEM but a custom made one(crappy). does someone know how i can source replacement parts?
[IMG][/IMG]
kevin

[TANNER]

The blowback housing? tokyo model club or E hobby would be my first bets. You can also get a lightened version.

[viking9934]

i just can't find the blow back unit over the net expect at tokyo model but it out of stock, but i have emailed tokyo model.

now i can't find the TM18c-21 part....BUT soemone could take picture of the part removed form the glock( like 6 frames....for up/down/left/right/front/rear) and measure the thickness , so i can make a custom one?
it would be awesome if someone would take the time!

kevin

[viking9934]

Can someone take a picture of the part , please?

[Qlong]

I'll send you some pics and measurements if no one else has done so already.

[viking9934]

Perfect thanks you

[Qlong]

Here are the pictures.

[viking9934]

Perfect! Do you have some measure, especially the thickness?
thanks a lot for the help

[viking9934]

ok so i figured out the major dimensions, but i would need the dimension of the hole where the fire selector is.
Also i have estimate the thickness around .050 am i right?

[Qlong]

The thicknesses are:

Arm: 1.30mm
Bottom plate: 2.00mm
Rear plate: 3.00mm

I just lost part 50... So I made another one.

[viking9934]

Perfect , i am almost bull eyes with you dimension. I have milled the majority of the part but Next tricky part will be the fire selector cutout. The part fit perfectly now i need your help again...can you measure the cutout where the fire selector rotate?

[Qlong]

Just add the radius of the selector to find the center.

There's also a counter bore along the contour of the radius that is +1.00mm to radius with a thickness of 1.00mm.