GBBR Gun doc in toronto?

[madlz]

Hey guys. I recently installed the RAtech full upgrade (full trigger hammer etc and npas etc) on my WE SCAR and it now will shoot a few rounds in semi then have the cocking hammer get stuck where I will have to push it forward to make it work again.

Does anyone know a good GBBR gun doc in Toronto/GTA? I've tried everything and read up but don't have enough knowledge or experience to get this fixed and would like a professional to help me as I just want my gun to get working for the spring.

Thanks guys!

[Boris the Blade]

Try Tyson. He posts on most GBBRS threads, I can't remember his full ASC handle, it's m1012... He is the man to see about fixing guns in Toronto.

[madlz]

I cant find him on the site do you have his full name??

[R.I.T.Z]

here is his profile

http://www.airsoftcanada.com/member....er.php?u=12002


his name is tyson

[Solomance]

m102404

http://www.airsoftcanada.com/member.php?u=12002

[turok_t]

Originally Posted by madlz

Hey guys. I recently installed the RAtech full upgrade (full trigger hammer etc and npas etc) on my WE SCAR and it now will shoot a few rounds in semi then have the cocking hammer get stuck where I will have to push it forward to make it work again.

Does anyone know a good GBBR gun doc in Toronto/GTA? I've tried everything and read up but don't have enough knowledge or experience to get this fixed and would like a professional to help me as I just want my gun to get working for the spring.

Thanks guys!

If you look at my post in the WE thread, i posted the EXACT same problem for my RA tech trigger kit. I think this problem you are experiencing is inherent in the design..you have to mod it a bit for it to work.. the reason for your problem, which i can almost guarantee u, is the sear hook is catching on the hammer and preventing it to be released..thats why u have to push it forward lightly so they "unhook" each other.

[madlz]

Originally Posted by turok_t

If you look at my post in the WE thread, i posted the EXACT same problem for my RA tech trigger kit. I think this problem you are experiencing is inherent in the design..you have to mod it a bit for it to work.. the reason for your problem, which i can almost guarantee u, is the sear hook is catching on the hammer and preventing it to be released..thats why u have to push it forward lightly so they "unhook" each other.

Do you have any pictures of what you did exactly (the parts sanded down)???

I thought it had something to do with the hop up chamber or guide rod hopefully it can be solved with what you did!

[turok_t]

Originally Posted by madlz

Do you have any pictures of what you did exactly (the parts sanded down)???

I thought it had something to do with the hop up chamber or guide rod hopefully it can be solved with what you did!

No, it has nothing to do with those.. its the trigger assembly.. Yes, it can be solved.. when i open up my trigger box next time, ill take pictures for u man..

[Duckman]

what fps did you adjust it to? the scar doesnt like to cycle completely if you lower it too much

[m102404]

Thanks guys.

PM sent

[Qlong]

Is it much like Turok's video?



If it is anything like Turok's problem, all you have to do is replace the 2 trigger springs with the trigger springs in the stock gearbox. RATech's trigger springs are too weak and don't have enough force to release the sear from the hammer.

Comparing the stock and RATech springs, I would say it is like comparing a 0.5lb trigger pull to a 3lb trigger pull.

Originally Posted by madlz

Do you have any pictures of what you did exactly (the parts sanded down)???

You don't have to sand anything down, I had to refile Turok's hammer and sear down because he had filed them at an awkward angle, the stock trigger springs should have enough force to reset the "hooked" hammer/sear without any other modifications.

Originally Posted by turok_t

No, it has nothing to do with those.. its the trigger assembly.. Yes, it can be solved.. when i open up my trigger box next time, ill take pictures for u man..

Easy for you to say, you just sat there and watched me do all the work

[turok_t]

Hey! I worked on it too!! But yes, the RA tech springs have to go, use the stock ones..I forgot to mention that.. Qlong, was the ra tech springs really that loose compared to stock? I didnt give it a feel.

[sammynac99]

I know this is a necro, but I need work done on my KC02 in the GTA, could a gun doc with a NPAS in stock for it PM me? Appreciated.....