Building a high trigger response setup

[JerryMcGoulBerry]

I want my A&K Masada to shoot the second I touch the trigger. My question is, should I use the Lonex A1 (Speed and torque) or the A2 (MOAR TORQUE!)
I'm using an 11.1 lipo and an active breaking mosfet with standard gears and an M110 spring

[XZIVR]

With that spring I would go with the with the speed motor.

[Deadpool]

You would need to have a mosfet that brings your AEG to an "open bolt" mode. Meaning that your spring should be compressed after every shot. I remember seeing this a few years back, but I don't think its still done. It can't be very good for the spring and internals.

[RY725]

If you want instant response from your trigger id suggest a dsg (dual sector gear) only problem is their kind of a bitch to install and shim correctly, and full auto will ramp up large (20-40rps) possibly more.

[RY725]

Look it up on youtube and you'll see what i mean

[Curo]

Install a GBB kit..... If it ever comes out

[XZIVR]

Originally Posted by Deadpool

You would need to have a mosfet that brings your AEG to an "open bolt" mode. Meaning that your spring should be compressed after every shot. I remember seeing this a few years back, but I don't think its still done. It can't be very good for the spring and internals.

Precocking. My mosfet does that but with a weak spring it doesn't really work very well. But for that you would really want a torque motor..

[ThunderCactus]

polarstar? lol

[cetane]

10:1 gears SS 2-3 teeth, m140'ish spring, 11.1 big battery & high torque motor.

If you want to use stock gearing, short stroke & go up a spring or 2. It will quicken the response

[lurkingknight]

Originally Posted by cetane

10:1 gears SS 2-3 teeth, m140'ish spring, 11.1 big battery & high torque motor.

If you want to use stock gearing, short stroke & go up a spring or 2. It will quicken the response

this.