Umarex H&K G36V AEG Inner Barell length?

[tomsoderman]

Can someone confirm the inner barell length of this aeg
In the instruction book it says 540mm
ive seen 509 on forums
and 460 on retailers sites
which is it?

[WHOABLAH]

It is 509mm

[tomsoderman]

Originally Posted by WHOABLAH

It is 509mm

thanks so a 550 would stick out the end quite a bit hmm

[Stealth]

If by quite a bit you mean 41mm, then yes.

Could always just use a longer muzzle brake.

[pestobanana]

Just get a 509, there isn't really a difference between that and 550.

[ThunderCactus]

+1, these aren't real firearms, you won't even notice a difference between a 509 and 550

[tomsoderman]

next question how do i get the actual hop-up/barell out
something to do with the screw on top of body above hop up or just a matter of twisting the hopup unit

[KenTsui]

If it's anything like my Umarex G36CV, you push the hop-up in, and turn the hopup unit (spring loaded) counter-clockwise about 90 degrees (looking from the gearbox towards the muzzle).

[tomsoderman]

yes figured it out is it normal for hop up to sit crooked in resting position mine is tilted to the right instead of straight :S

[WHOABLAH]

I believe that is normal, both my g36's does the exact same thing. But when you put the outer barrel and gearbox on it should straighten the whole system out.

[tomsoderman]

really mine is still extremely tilted ill play around with it again later i guess

Originally Posted by WHOABLAH

I believe that is normal, both my g36's does the exact same thing. But when you put the outer barrel and gearbox on it should straighten the whole system out.