Ics m16 front sight

Montique · May 23rd, 2014, 03:04

May seem like a dumb question, but I cannot remove the front sights. Does anyone know if I even can on an Ics? When I look for the pins there not 'solid' so to speak, which makes it difficult to find a tool to punch them out. Is there some other methods of taking a front sight off?

Thanks.

Kos-Mos · May 23rd, 2014, 10:45

A pin puch works perfectly.

With the right tools, it's a lot easier.

AirsoftJay · May 23rd, 2014, 11:03

I removed the front sight from my bro's ICS M16, there shouldn't be any pins, just a grub screw on the bottom. All you need is the right size allen key

Montique · May 23rd, 2014, 13:31

Quote:

Originally Posted by Kos-Mos

A pin puch works perfectly.

With the right tools, it's a lot easier.

Do you happen to know what size I would need?

Kos-Mos · May 23rd, 2014, 13:58

I have a whole set... usually I use either 1/16 or 3/32.

But double check, as stated, sometimes it's just a set screw or two under.

ICS made changes to theirs guns over the 15+ years they have been making them.

That is why some have 1 piece barrels, some 2 pieces (the best), some 3 pieces, some have metric threads on the receiver and some have SAE/RealSteel threads...

Good luck!

Montique · May 23rd, 2014, 18:17

Yeh I looked for some set screws , only one is the triangle connecting to the part that holds the hand guard, I'm just wondering if it might just be a one piece, cause like I said the pins are not solid and just impossible to get at. Although there does look to be threading on the outside of the barrel. I'm just wondering if those pins are even ment to come out

Rusty Lugnuts · May 23rd, 2014, 18:21

ON the less expensive ICs M16 - i don't think the front sight comes off

Montique · May 23rd, 2014, 21:47

Oh . Alright well that's sucks. Just wanted to put on my freefloat

thanks for the responses, it's appreciated.. Time for a new outer

Montique · June 5th, 2014, 00:15

Hi guys,
Sorry to bring this post back to life but I had another question which relates to my ics.

Basically I figured out I have a 2 piece outer barrel, got it apart and found out my freefloat rail don't fit. I'm thinking just getting a new lower and upper reciever ( as my stock also ripped off and left the upper gearbox showing) I now have to tape my battery to
My grip... My custom cqb m16 .. Not too perdy.

Anyways , I'm not sure if this question is a answerable, but
Does anyone know if I can fit a split gearbox into any other body's? I've seem a few for sale on asc here.

Thank you, and again sorry for necro

Edit : I should also add I remember it's an ics sport line ( polymer reciever, maybe 2010?)

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

May 23rd, 2014, 03:04	#1
Montique Trader rating Join Date: Jun 2009 Location: St.Catharines, ON	Ics m16 front sight May seem like a dumb question, but I cannot remove the front sights. Does anyone know if I even can on an Ics? When I look for the pins there not 'solid' so to speak, which makes it difficult to find a tool to punch them out. Is there some other methods of taking a front sight off? Thanks.

May 23rd, 2014, 21:47	#8
Montique Trader rating Join Date: Jun 2009 Location: St.Catharines, ON	Oh . Alright well that's sucks. Just wanted to put on my freefloat thanks for the responses, it's appreciated.. Time for a new outer Last edited by Montique; May 23rd, 2014 at 22:31..

May 23rd, 2014, 11:03	#3
AirsoftJay Trader rating Join Date: Mar 2009 Location: Orangeville, Ontario	I removed the front sight from my bro's ICS M16, there shouldn't be any pins, just a grub screw on the bottom. All you need is the right size allen key

May 23rd, 2014, 18:17	#6
Montique Trader rating Join Date: Jun 2009 Location: St.Catharines, ON	Yeh I looked for some set screws , only one is the triangle connecting to the part that holds the hand guard, I'm just wondering if it might just be a one piece, cause like I said the pins are not solid and just impossible to get at. Although there does look to be threading on the outside of the barrel. I'm just wondering if those pins are even ment to come out

May 23rd, 2014, 18:21	#7
Rusty Lugnuts Fainting Goat, Dictator of Quinte West Trader rating Join Date: Nov 2011 Location: Cobourg Ontario	ON the less expensive ICs M16 - i don't think the front sight comes off

June 5th, 2014, 00:15	#9
Montique Trader rating Join Date: Jun 2009 Location: St.Catharines, ON	Hi guys, Sorry to bring this post back to life but I had another question which relates to my ics. Basically I figured out I have a 2 piece outer barrel, got it apart and found out my freefloat rail don't fit. I'm thinking just getting a new lower and upper reciever ( as my stock also ripped off and left the upper gearbox showing) I now have to tape my battery to My grip... My custom cqb m16 .. Not too perdy. Anyways , I'm not sure if this question is a answerable, but Does anyone know if I can fit a split gearbox into any other body's? I've seem a few for sale on asc here. Thank you, and again sorry for necro Edit : I should also add I remember it's an ics sport line ( polymer reciever, maybe 2010?)

Ics m16 front sight

Doctor's Corner