|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
October 31st, 2014, 01:57
|
#1 |
|
mods to make kenwood ptts fit baofeng uv-5r better
so i got a nice set of ztac kenwood ptts( better than the motorola crap id say) but im hittin a problem. it doesn't like to stay in the baofeng uv-5r's kenwood ptt slot. I have to squeeze the ptt and the radio together tightly in order for the connection to be solid( no muffled sound, ptt actually functioning etc). is there any mods i can attempt to possibly solve this problem?
__________________
What Doesn't Kill You Will Be Pumped Full Of Bullets |
|
|
|
October 31st, 2014, 02:02
|
#2 |
|
Try trimming some material from around the base of the pins, to let the pins slide in a bit more. I had to do this with a Kenwood-style plug for a UV5R before.
|
|
|
|
|
October 31st, 2014, 14:30
|
#3 |
|
|
just did, still facing same issue. it seems the pin likes to disconnect itself
__________________
What Doesn't Kill You Will Be Pumped Full Of Bullets |
|
|
|
|
October 31st, 2014, 15:13
|
#4 |
|
|
Pin too narrow or spring tab inside compressed? Does it work better with a different Kenwood-style plug?
|
|
|
|
|
October 31st, 2014, 18:59
|
#5 |
|
Prancercise Guru
|
Are you sure it's a Kenwood?
There are multiple types of 2 pin plugs.
__________________
Airsoft, where nothing is hurt but feelings. |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
