KAC Stoner 96/Classic Army Knights LMG

hoodlum · May 10th, 2015, 22:36

this is a good read.... tempted to rewire it to the buttstock and run the vfc bevel on shs 13:1s. Ive been getting good results with vfc bevels and semi terribad angled pistol grips. maybe the smp proj will be on a quick pause :P

Heavy · May 15th, 2015, 12:46

I am looking to mod the stock any suggestion or help would be appreciated.
thanks for grip and motor info working on that

EOD Steve · May 15th, 2015, 13:54

Quote:

Originally Posted by Heavy

I am looking to mod the stock any suggestion or help would be appreciated.
thanks for grip and motor info working on that

http://www.airsoftcanada.com/showthread.php?t=170062

Wiring tip - Do NOT try to rewire the red/black wires on either side of the motor grip. You will destroy your negative lead.

helljumper02 · May 19th, 2015, 15:13

I'm really liking the pre-travel/break adjustment screw. After running the stoner all weekend at the Graylings blacksheep game, I'm thinking I'm going to work on that.

What motor are you currently running? I've re-wired mine to 16awg Milspec but have no where near that ROF ...

EOD Steve · May 20th, 2015, 09:31

You will need adjustment screws on both sides. One for pre-travel to maintain safety and one to modify the break point. You will see what I mean when you start fiddling with it.

Using a Lonex A1 with stock gears. Going to run them until they go, then will switch to 20:1 Siegeteks for a slower LMG ROF.

Chlorum · April 3rd, 2017, 06:37

Some time has passed since Stoner by CA and Ares have been released.
Any noticeable difference between the brands?

Bob1985 · April 27th, 2017, 07:51

Quote:

Originally Posted by EOD Steve

Did some work on the platform this weekend.

Modified stock trigger to add adjustability for pre-travel and break
Added wiring for a Gate MERF 3.2 MOSFET (CA wire is already 16awg low-resistance wire but I replaced one length with milspec 16awg wire)
Removed stock wiring tray in lower receiver for a cleaner MOSFET install
Installed Magpul MOE grip (motor angle isn't good but comfort is more important in this build as the gun weighs 10+ lbs)

Video:
https://www.youtube.com/watch?v=sCANcc-6qPM

Sweet!!

Chuker · May 14th, 2017, 00:03

Would anyone know if the box mag of the ares can be used on the ca? Also, if the stock mod can be used as well?

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

May 20th, 2015, 09:31	#35
EOD Steve Trader rating Join Date: Jun 2012	You will need adjustment screws on both sides. One for pre-travel to maintain safety and one to modify the break point. You will see what I mean when you start fiddling with it. Using a Lonex A1 with stock gears. Going to run them until they go, then will switch to 20:1 Siegeteks for a slower LMG ROF. __________________ The Steve has spoken.

May 10th, 2015, 22:36	#31
hoodlum Trader rating Join Date: Jul 2014 Location: Nova Scotia	this is a good read.... tempted to rewire it to the buttstock and run the vfc bevel on shs 13:1s. Ive been getting good results with vfc bevels and semi terribad angled pistol grips. maybe the smp proj will be on a quick pause :P

May 15th, 2015, 12:46	#32
Heavy DeathStudent Trader rating Join Date: May 2011 Location: Vaudreuil,Quebec	I am looking to mod the stock any suggestion or help would be appreciated. thanks for grip and motor info working on that

May 19th, 2015, 15:13	#34
helljumper02 Trader rating Join Date: Apr 2011 Location: Kingston, ON	I'm really liking the pre-travel/break adjustment screw. After running the stoner all weekend at the Graylings blacksheep game, I'm thinking I'm going to work on that. What motor are you currently running? I've re-wired mine to 16awg Milspec but have no where near that ROF ...

April 3rd, 2017, 06:37	#36
Chlorum Trader rating Join Date: Aug 2013 Location: Coquitlam, BC	Some time has passed since Stoner by CA and Ares have been released. Any noticeable difference between the brands?

May 14th, 2017, 00:03	#38
Chuker Trader rating Join Date: May 2017	Would anyone know if the box mag of the ares can be used on the ca? Also, if the stock mod can be used as well?

KAC Stoner 96/Classic Army Knights LMG

Reviews