Need Help With APS-2 EX!!!!!!!

Kez · December 15th, 2005, 15:12

Hey Guys. I just recently picked up an APS-2 EX, its an awesome gun, but the only thing is that the hop up is kind of screwy. Its good for around 20-30 feet, but that distance is way to short for sniping, and if i go any further away, the bb always seems to shoot upwards, and usually misses the target by quite a bit. I dont know how to adjust the hop up for it or if there even is a hop up. So if anyone knows how to change the hop up for the APS-2 EV or has instructions for how to adjust the hop up or just has a solution to this problem, PLEASE help me out and respond to this thread, Thanx a lot. :salute:

vondnik · December 15th, 2005, 20:44

the hopup on the aps is fixed.. you can not adjust it. IF your bb's are going up it's becasue your using a bb that is to light...

Spitfire · December 16th, 2005, 07:43

fixed? i have a t96, there its not fixed...
(you would find a imbusscrew in front of the hole, where the bbs go inside...)
if not, try heavier bbs... 0.28,0.30,0.33,0.36gramms ... one of them should fit at least

Kez · December 16th, 2005, 14:40

Thanx vondnik for the tip, i'll be sure to get new bbs, thank you

Mr Jon · December 16th, 2005, 15:10

I have an APS-2 SV and the hop is normally fixed, however there are companies such as PDI which make adjustable hop units for the APS, I actually have one installed on mine which will allow me to use different weighted BBs.

Kez · December 16th, 2005, 16:18

Hey Phrozen... where did you get ur PDI hop up system and how much was it??

Mr Jon · December 16th, 2005, 16:56

no clue really, I bought it from some other guy who had previously installed it. However it looks like it can be found here at $61.00 USD. Proably as much as $100.00+ after importation

http://www.wgcshop.com/pcart/shopper...142cde90831ae2

Kez · December 16th, 2005, 17:13

Hey thanx very much phrozen, Thanx for the help!
:salute:

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

December 15th, 2005, 15:12	#1
Kez Trader rating Join Date: Dec 2005 Location: Toronto	Need Help With APS-2 EX!!!!!!! Hey Guys. I just recently picked up an APS-2 EX, its an awesome gun, but the only thing is that the hop up is kind of screwy. Its good for around 20-30 feet, but that distance is way to short for sniping, and if i go any further away, the bb always seems to shoot upwards, and usually misses the target by quite a bit. I dont know how to adjust the hop up for it or if there even is a hop up. So if anyone knows how to change the hop up for the APS-2 EV or has instructions for how to adjust the hop up or just has a solution to this problem, PLEASE help me out and respond to this thread, Thanx a lot. :salute:

December 15th, 2005, 20:44	#2
vondnik Ban-Fu Sifu Trader rating Join Date: Nov 2002 Location: Socialist republic of Kebekistan	the hopup on the aps is fixed.. you can not adjust it. IF your bb's are going up it's becasue your using a bb that is to light... __________________ Vondnik, team Bad Karma, PQAC Murphy's second rule: Nothing is impossible for the man who does not have to do it himself.

December 16th, 2005, 15:10	#5
Mr Jon Trailer Park Supervisor Trader rating Join Date: Jul 2003 Location: Winnipeg MB	I have an APS-2 SV and the hop is normally fixed, however there are companies such as PDI which make adjustable hop units for the APS, I actually have one installed on mine which will allow me to use different weighted BBs. __________________

December 16th, 2005, 07:43	#3
Spitfire Trader rating Join Date: Dec 2005 Location: Switzerland	fixed? i have a t96, there its not fixed... (you would find a imbusscrew in front of the hole, where the bbs go inside...) if not, try heavier bbs... 0.28,0.30,0.33,0.36gramms ... one of them should fit at least

December 16th, 2005, 14:40	#4
Kez Trader rating Join Date: Dec 2005 Location: Toronto	Thanx vondnik for the tip, i'll be sure to get new bbs, thank you

December 16th, 2005, 16:18	#6
Kez Trader rating Join Date: Dec 2005 Location: Toronto	Hey Phrozen... where did you get ur PDI hop up system and how much was it??

December 16th, 2005, 16:56	#7
Mr Jon Trailer Park Supervisor Trader rating Join Date: Jul 2003 Location: Winnipeg MB	no clue really, I bought it from some other guy who had previously installed it. However it looks like it can be found here at $61.00 USD. Proably as much as $100.00+ after importation http://www.wgcshop.com/pcart/shopper...142cde90831ae2 __________________

December 16th, 2005, 17:13	#8
Kez Trader rating Join Date: Dec 2005 Location: Toronto	Hey thanx very much phrozen, Thanx for the help! :salute:

Need Help With APS-2 EX!!!!!!!

Airsoft Guns Discussion