TM G36c Upgrades

[k2x5]

Hi All,

Okay, I already know what response this message will receive, but I'm going to post it anyway... I want to upgrade my TM G36c, but I'm not necesarily after higher FPS. Though I know that would increase the range some, I am more interested in having an acurate shot than an extremely far shot.

Having read, and re-read many posts and articles all over the internet, and the guides here on ACS, I've decided to replace the spring with a slightly stronger one, change the inner barrel to a tightbore, and add a silencer to cover the extended barrel.

Now, the question I have is what next? What manufacturer should I go with? And where should I get the parts from? Any reccomendations from anyone who has done it before with this gun have suggestions?

I have taken my gun apart a couple of times now to examine the internals, and so I'm fairly comfortable working inside it.

[Greylocks]

Good approach.

Check the pinned posts in this section and keep it simple. Get parts from a Retailer (they can suggest manufacturers).
Start with the spring (let's say an M100 or equivalent), and metal bushings. Add a bearing spring guide. Perhaps add a better piston kit.

Wait for the barrel / suppressor option, you may not need it.

The rest is experience with tweaking the hopup to match your ammo's weight.

[Drake]

Just going to a tightbore will provide you with a noticeable difference (tighter grouping, which extends your useable range a bit). A longer barrel isnt necessarily going to help you. e.g., a shorter (11.5" Commando-length) tightbore noticeably ougrouped/outranged a stock 14" (m4a1) length barrel in my M933 (converted from an M4A1) -- using the same mechbox, of course.

Plus extending the barrel into a suppressor sorta defeats the point of having a compact rifle (like the g36c)

I recommend the KM TN 6.04 inners.