TASCO RDS 1X30mm

Dr_Tinshnipz · February 11th, 2006, 23:39

Im getting one in couple days

i saw the tasco like 30 minutes before i saw this thread haha but i dont have the money to get it yet

yanhchan · February 14th, 2006, 20:09

LOL seriously get it its pretty good...and the workman ship and weight is fairly nice too

mykill666 · February 15th, 2006, 05:28

i think theyr ok, i have one that i got free with an aeg from red dragon on aso. in my opinion they look rediculas on a m4, but decen t on a g36.

RobG · February 16th, 2006, 02:25

Quote:

Originally Posted by mykill666

i think theyr ok, i have one that i got free with an aeg from red dragon on aso. in my opinion they look rediculas on a m4, but decen t on a g36.

You could be right. I think the tasco scope looks good on both the P90 and G36c. Both are smaller smg's so the size/shape of the scope goes well with them. My biggest gripe however are how the adjustments seem designed for a 'coin' screwdriver.

Rob

Here's my guns for reference:

Red Ghost · February 16th, 2006, 18:17

Quote:

Originally Posted by RobG

My biggest gripe however are how the adjustments seem designed for a 'coin' screwdriver.

Do they not have knurling on the knobs? I thought that they did.

And don't laugh.. there actually is a screwdriver bit that is shaped like a half circle. We call them coin-slots. They're for an aviation type-specific fastener on Hawker buisness jets. They're a real pain in the ass when the fastener heads have paint in them.

yanhchan · February 16th, 2006, 18:43

Agreed...the paint is a bitch to deal with. You have to be very careful as not to scratch it...

LOL I like it on the P90 more than the G36...

RobG · February 17th, 2006, 03:46

Quote:

Originally Posted by Red Ghost

Quote:

Originally Posted by RobG

My biggest gripe however are how the adjustments seem designed for a 'coin' screwdriver.

Do they not have knurling on the knobs? I thought that they did.

And don't laugh.. there actually is a screwdriver bit that is shaped like a half circle. We call them coin-slots. They're for an aviation type-specific fastener on Hawker buisness jets. They're a real pain in the ass when the fastener heads have paint in them.

Those are just caps that screw off like other scopes. It would be nice if the adjustments could be made without any tool.

Here is an updated picture of my G36 with the scope, handgrip AND tracer unit which just arrived today! Thanks Tru!

Rob

Rob

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

February 14th, 2006, 20:09	#17
yanhchan Trader rating Join Date: Jun 2005 Location: Scarborough/Richmond Hill ON	LOL seriously get it its pretty good...and the workman ship and weight is fairly nice too __________________ YANHCHAN'S AIRSMITHING: AEG repair/Tune up/Upgrades V2/V3 mechboxes, rewiring/reconnecting. Ask not what your country can do for you; ask what you can do for your country ~John F. Kennedy

February 16th, 2006, 18:43	#21
yanhchan Trader rating Join Date: Jun 2005 Location: Scarborough/Richmond Hill ON	Agreed...the paint is a bitch to deal with. You have to be very careful as not to scratch it... LOL I like it on the P90 more than the G36... __________________ YANHCHAN'S AIRSMITHING: AEG repair/Tune up/Upgrades V2/V3 mechboxes, rewiring/reconnecting. Ask not what your country can do for you; ask what you can do for your country ~John F. Kennedy

February 15th, 2006, 05:28	#18
mykill666 Banned Trader rating Join Date: Dec 2004 Location: Niagara Falls	i think theyr ok, i have one that i got free with an aeg from red dragon on aso. in my opinion they look rediculas on a m4, but decen t on a g36.

TASCO RDS 1X30mm

Reviews