Airsoft Canada
https://www.replicaairguns.ca/airsoft

Go Back   Airsoft Canada > Discussion > Doctor's Corner
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

WE Hicapa 5.1 Cycling Problem

:

Doctor's Corner

Reply
 
Thread Tools
Old February 1st, 2007, 01:51   #1
Jyce
 
Join Date: Oct 2005
Location: Winnipeg MB
WE Hicapa 5.1 Cycling Problem

I game with a WE Hicapa 5.1 Dragon Model (the black half-slide one with chrome barrel) and when the gun fires it only blows back half-way so that it still shoots the chambered bb, but doesn't go far enough back to Chamber the next bb.

My suspicion is that in the cylinder attached to the feeding nossle either
a) the o-ring doesn't have a proper seal so the gas does not get the resistance needed for the blowback

or

b) the inside of the cylinder has worn away making a gap for gas to freely ignore teh seal.

any help would be much appreciated.
Jyce is offline   Reply With Quote
Old February 1st, 2007, 09:57   #2
Jyce
 
Join Date: Oct 2005
Location: Winnipeg MB
Well after some tinkering my suspicion has been proven wrong,

I took the WORKING cylinder and piston head from a working WE hicapa type-R and got the same result.

I could Really use the help people, im outta ideas.

EDIT: After more tinkering i've found that the problem lies within the grip/body it'self, the silde/barrel system works perfectly on the Type-R grip/body.

Last edited by Jyce; February 1st, 2007 at 10:08.. Reason: Didnt wanna post again
Jyce is offline   Reply With Quote
Old February 1st, 2007, 13:00   #3
The Saint
 
The Saint's Avatar
 
Join Date: Jan 2005
Location: Quebec
Are we talking about a lame half-way blowback or an abrupt half-way stop? Former could be a bad seal between the mag's rubber gas exit thing and the slide's nozzle assemble, latter could be a physical impediment somewhere.
__________________
"The Bird of Hermes is My Name, Eating My Wings to Make Me Tame."
The Saint is offline   Reply With Quote
Old February 1st, 2007, 19:09   #4
Jyce
 
Join Date: Oct 2005
Location: Winnipeg MB
I think it's the stopping problem because the bb's still get some good power out of it.

also considering the silde/barrel set work fine on the second hicapa's frame.
Jyce is offline   Reply With Quote
Old February 3rd, 2007, 17:14   #5
Jyce
 
Join Date: Oct 2005
Location: Winnipeg MB
Quote:
Originally Posted by The Saint View Post
Former could be a bad seal between the mag's rubber gas exit thing and the slide's nozzle assemble
after tinkering with it for a while, and then re-reading your post, i belive this is the problem, because all of the monkey-metal warping has been filed down, and i've oiled it to make sure it has the lubrication nessisary, but it SEEMS like it doesnt have enough power to blowback past the hammer.

anyone know the fix for this?

EDIT: Btw, the slide/gas chamber setup/mag is used on both frames, it just refuses to work on the dragon frame.
(it works on the type-r frame)

Last edited by Jyce; February 3rd, 2007 at 17:15.. Reason: forgot info.
Jyce is offline   Reply With Quote
Old February 4th, 2007, 03:40   #6
Jyce
 
Join Date: Oct 2005
Location: Winnipeg MB
After talking to a local airsofter, i've pinned the problem,

It was that the magazine is being off-set too low because of wear on the magazine catch.

the magazine catch had gotten worn down over a year of gaming (and chairsofting :P)

so just a headsup to any WE hi-capa users, the mag-catch is an eventual problem, it's already happening on my type-r aswell.
Jyce is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Doctor's Corner

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://www.replicaairguns.ca/airsoft

All times are GMT -4. The time now is 02:54.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.