|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
February 4th, 2007, 17:31 | #1 |
SD5 Silencer Wobble
Hey, I've got an ICS MP5-SD5 and the silencer has some play in it although its fully threaded on. The actual part that wobbles is the part the silencer threads onto. I've tried taking apart the whole front end but I can't find a grub screw or any screw to stop the play. Any solutions to getting the play out or where/if theres a grub screw im missing to tighten it up?
Thanks |
|
February 4th, 2007, 17:36 | #2 |
Official ASC Bladesmith
|
Try wrapping the threads with white teflon plumbers tape, that should help some.
|
February 4th, 2007, 18:02 | #3 |
My mistake if I didn't explain it right, but the part that is wobbling isn't the silencer itself but, when you take it off theres the part it threads onto wobbles. So in-turn when you thread the silencer on it just amplifies the movement. Just clearing that up.
|
|
February 4th, 2007, 20:11 | #4 |
Official ASC Bladesmith
|
Still not clear, but if the wobble comes from threads at all, what I posted earlier will tighten it up. If it has nothing to do with threads, chances it won't. At first I understood it as being thread related, is why I posted about the white teflon plumbers tape.
|
February 4th, 2007, 22:13 | #5 |
It has nothing to do with the threads, I'll post a picture tommorow to what I'm reffering to so it's all clear. But I'll try to explain more. With the silencer fully off, your left with the part it connects to (On the gun) which surrounds the inner barrel. This piece has 2 holes in it on the threads, one on the left one on the right. This is the piece that is wobbling.
Thanks |
|
|
Bookmarks |
|
|